Department of Aeronautical and Automobile Engineering, Manipal Institute of Technology, Manipal

2023

Aerodynamic performance improvement of a blended wing-body re-entry vehicle using ANSYS CFX

Hossan, S. & Srinivas, G., 2023, (Accepted/In press) In: Aerospace Systems.

Research output: Contribution to journal › Article › peer-review

Open Access

Airflow patterns and particle deposition in a pediatric nasal upper airway following a rapid maxillary expansion: Computational fluid dynamics study

Valerian Corda, J., Emmanuel, J., Nambiar, S., Prakashini, K. & Zuber, M., 2023, In: Cogent Engineering. 10, 1, 2158614.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

An experimental investigation on the matrix dependent rheological properties of MRE

Poojary, U. R., Kiran, K., Hegde, S. & Gangadharan, K. V., 2023, (Accepted/In press) In: Journal of Intelligent Material Systems and Structures.

Research output: Contribution to journal › Article › peer-review

A numerical approach for response of whipple shields with coated and monolithic front bumper to hypervelocity impact by spherical projectiles

Pai, A., Sharma, A., Eby, I. M., Kini, C. R. & Shenoy, S. B., 01-2023, In: Acta Astronautica. 202, p. 433-441 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

A Review on Vibrations in Electric and Hybrid Electric Vehicles

Krishna, K., Mahesha, G. T., Hegde, S. & Satish Shenoy, B., 04-2023, In: Journal of The Institution of Engineers (India): Series C. 104, 2, p. 423-438 16 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

Assessment of ageing effect on the mechanical and damping characteristics of thin quasi-isotropic hybrid carbon-Kevlar/epoxy intraply composites

Agarwal, S., Pai, Y., Pai, D. & Mahesha, G. T., 2023, In: Cogent Engineering. 10, 1, 2235111.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Comparative Study of Dimple Effect on Three-Dimensional Cambered Aircraft Wing

Sett, R., Verekar, P. P. & Zuber, M., 04-2023, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 104, 2, p. 115-126 12 p.

Research output: Contribution to journal › Article › peer-review

Cooperative Online Workspace Allocation in the Presence of Obstacles for Multi-robot Simultaneous Exploration and Coverage Path Planning Problem

Nair, V. G., Adarsh, R. S., Jayalakshmi, K. P., Dileep, M. V. & Guruprasad, K. R., 07-2023, In: International Journal of Control, Automation and Systems. 21, 7, p. 2338-2349 12 p.

Research output: Contribution to journal › Article › peer-review

Drag Mitigation of Trilobed Airship Hull through Aerodynamic Comparison with Conventional Single-Lobed Hull

Tripathi, M., Manikandan, M., Pandey, P. & Pant, R. S., 01-11-2023, In: Journal of Aerospace Engineering. 36, 6, 04023073.

Research output: Contribution to journal › Article › peer-review

Durability study of quasi-isotropic carbon/epoxy composites under various environmental conditions

Aithal, S., Hossagadde, P. N., Kini, M. V. & Pai, D., 07-2023, In: Iranian Polymer Journal (English Edition). 32, 7, p. 873-885 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Dynamics of multiple pendulum system under a translating and tilting pivot

Bondada, A. & Nair, V. G., 09-2023, In: Archive of Applied Mechanics. 93, 9, p. 3699-3740 42 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of ageing conditions on the low velocity impact behavior and damage characteristics of aramid-basalt/epoxy hybrid interply composites

Pai, Y., Dayananda Pai, K. & Vijaya Kini, M., 10-2023, In: Engineering Failure Analysis. 152, 107492.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Effect of Cavitation and Temperature on Fluid Film Bearing Using CFD and FSI Technique: A Review

Kamat, H., Kini, C. R. & Shenoy, S. B., 04-2023, In: Archives of Computational Methods in Engineering. 30, 3, p. 1623-1636 14 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

2 Citations (Scopus)

Effect of chemical treatments on physical and mechanical characteristics of Helicteres isora natural fiber

Acharya, P., Pai, D. & Mahesha, G. T., 2023, (Accepted/In press) In: Materials Today: Proceedings.

Research output: Contribution to journal › Article › peer-review

Effect of various factors and hygrothermal ageing environment on the low velocity impact response of fibre reinforced polymer composites- a comprehensive review

Fernandes, O., Dutta, J. & Pai, Y., 2023, In: Cogent Engineering. 10, 1, 2247228.

Research output: Contribution to journal › Review article › peer-review

Open Access

Evaluation of Hemodynamics Parameters in Carotid Bifurcation System using Numerical Simulation

Abhilash, H. N., Khader, S. M. A., Pai, R., Kumar, N., Zuber, M., Corda, J. & Tamagawa, M., 2023, Applications of Computation in Mechanical Engineering - Select Proceedings of 3rd International Conference on Computing in Mechanical Engineering ICCME 2021. Vučinić, D., Chandran, V., Mahbub, A. M. & Sobhan, C. B. (eds.). Springer Science and Business Media Deutschland GmbH, p. 149-161 13 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Experimental investigation of mechanical properties of bamboo/carbon fiber reinforced hybrid polymer matrix composites

Kudva, A., Kotian, A., Mahesha, G. T. & Pai, D., 2023, (Accepted/In press) In: Materials Today: Proceedings.

Research output: Contribution to journal › Article › peer-review

Experimental techniques for performance evaluation of shielding materials and configurations subjected to Blast and Ballistic impacts: A State-of-the-Art Review

Pai, A., Rodriguez-Millan, M., Beppu, M., Valverde-Marcos, B. & B., S. S., 10-2023, In: Thin-Walled Structures. 191, 111067.

Research output: Contribution to journal › Review article › peer-review

Kinematic Investigations of a Novel Flapping Actuation Design with Mutually Perpendicular 3 Cylindrical Joint Approach for FW-Drones

Singh, S., Zuber, M., Hamidon, M. N., Azriff Basri, A., Mazlan, N. & Ahmad, K. A., 06-2023, In: Biomimetics. 8, 2, 160.

Research output: Contribution to journal › Article › peer-review

Open Access

Manipal-UAV person detection dataset: A step towards benchmarking dataset and algorithms for small object detection

Akshatha, K. R., Karunakar, A. K., B., S. S., K., P. P., Dhareshwar, C. V. & Johnson, D. G., 01-2023, In: ISPRS Journal of Photogrammetry and Remote Sensing. 195, p. 77-89 13 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Mechanical Characteristics of Sugarcane Bagasse Fibre Reinforced Polymer Composites: A Review

Zafeer, M. K., Prabhu, R., Rao, S., Mahesha, G. T. & Bhat, K. S., 2023, In: Cogent Engineering. 10, 1, 2200903.

Research output: Contribution to journal › Review article › peer-review

Open Access

Micro- and nanoparticle transport and deposition in a realistic neonatal and infant nasal upper airway

Valerian Corda, J., Satish Shenoy, B., Arifin Ahmad, K., Lewis, L., Prakashini, K., Rao, A. & Zuber, M., 2023, (Accepted/In press) In: International Journal of Modelling and Simulation.

Research output: Contribution to journal › Article › peer-review

Multi Cost Function Fuzzy Stereo Matching Algorithm for Object Detection and Robot Motion Control

Shetty, A. A., Hegde, N. T., Vaz, A. C. & Srinivasan, C. R., 05-2023, In: Journal of Robotics and Control (JRC). 4, 3, p. 356-370 15 p.

Research output: Contribution to journal › Article › peer-review

Multi-scale Aerial Object Detection Using Feature Pyramid Networks

Johnson, D. G., Bhat, N., Akshatha, K. R., Karunakar, A. K. & Satish Shenoy, B., 2023, Information and Communication Technology for Competitive Strategies, ICTCS 2021- ICT: Applications and Social Interfaces. Joshi, A., Mahmud, M. & Ragel, R. G. (eds.). Springer Science and Business Media Deutschland GmbH, p. 303-313 11 p. (Lecture Notes in Networks and Systems; vol. 400).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Non-Coking coal as an additive to enhance properties of groundnut shell reinforced polypropylene composites

Santosh, M. S., Chethan, K., Vasudev, C., Guna, V., Balaji, K. R., Gopinathan, P., Kumar, M. & Reddy, N., 2023, (Accepted/In press) In: Journal of Thermoplastic Composite Materials.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Numerical investigation of aerodynamic characteristics of naca 23112 using passive flow control technique–gurney flaps

Chinnappa, V. & Srinivas, G., 2023, In: Cogent Engineering. 10, 1, 2222566.

Research output: Contribution to journal › Article › peer-review

Open Access

Performance analysis of Polar Codes in a Visible Light Communication System

Vaz, A. C., Hegde, N. T. & Shetty, A. A., 2023, In: Journal of Physics: Conference Series. 2466, 1, 012006.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Polymorphism in LiDy(WO₄)₂: Phase tunable synthesis, neutron diffraction, and symmetry-driven upconversion red emission

Munirathnappa, A. K., Maurya, S. K., Kumar, K., Hester, J., Kumar, R., Shivaprasad, S. M. & Sundaram, N. G., 06-2023, In: Materials Today Chemistry. 30, 101501.

Research output: Contribution to journal › Article › peer-review

Preliminary Design Analysis of Interplanetary Trajectories with Hohmann and Bi-Elliptic Manoeuvres

Pimple, S. S., Datta Sai, M. S. V., Hegde, N. T. & Vaz, A. C., 2023, ViTECoN 2023 - 2nd IEEE International Conference on Vision Towards Emerging Trends in Communication and Networking Technologies, Proceedings. Thanikaiselvan V, T. V., S, R. D., T, S. & S, K. (eds.). Institute of Electrical and Electronics Engineers Inc., (ViTECoN 2023 - 2nd IEEE International Conference on Vision Towards Emerging Trends in Communication and Networking Technologies, Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Processing techniques on plastic waste materials for construction and building applications

Jawaid, M., Singh, B., Kian, L. K., Zaki, S. A. & Radzi, A. M., 04-2023, In: Current Opinion in Green and Sustainable Chemistry. 40, 100761.

Research output: Contribution to journal › Review article › peer-review

4 Citations (Scopus)

Puck's Criterion for the tensile response of composite laminates: A numerical approach

Pai, A., Suri, R., Bhave, A. K., Verma, P. & N H, P., 01-2023, In: Advances in Engineering Software. 175, 103364.

Research output: Contribution to journal › Article › peer-review

Rapid single pot synthesis of hierarchical Bi₂WO₆ microspheres/RGO nanocomposite and its application in energy storage: A supercritical water approach

Shetty, M., Manickavasakam, K., Sabbanahalli, C., Bekal, C., Misnon, I. I., Subrahmanya P, A., Roy, K., Shivaramu, P. D., Shenoy. B, S. & Rangappa, D., 20-11-2023, In: Journal of Energy Storage. 72, 108116.

Research output: Contribution to journal › Article › peer-review

Review of Energy Management Strategies in Plug-in Hybrid-Electric Vehicles

Rohith, J. & Mahesha, G. T., 2023, Flexible Electronics for Electric Vehicles - Select Proceedings of FlexEV- 2021. Dwivedi, S., Singh, S., Tiwari, M. & Shrivastava, A. (eds.). Springer Science and Business Media Deutschland GmbH, p. 83-99 17 p. (Lecture Notes in Electrical Engineering; vol. 863).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Static, dynamic, and fatigue life investigation of a hip prosthesis for walking gait using finite element analysis

Reginald, J., Kalayarasan, M., Chethan, K. N. & Dhanabal, P., 2023, In: International Journal of Modelling and Simulation. 43, 5, p. 797-811 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Study of X-Pattern Crank-Activated 4-Bar Fast Return Mechanism for Flapping Actuation in Robo Drones

Singh, S., Muralidharan, A. K., Radhakrishnan, J., Zuber, M., Basri, A. A., Mazlan, N., Hamidon, M. N. & Ahmad, K. A., 05-2023, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 105, 2, p. 115-128 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

The evaluation of the mechanical properties of glass, kenaf, and honeycomb fiber-reinforced composite

Abidin, N. M. Z., Sultan, M. T. H., Md Shah, A. U., Shahar, F. S., Najeeb, M. I., Ali, M. R., Basri, A. A., Baloor, S. S., Gaff, M. & Hui, D., 01-01-2023, In: Reviews on Advanced Materials Science. 62, 1, 20220299.

Research output: Contribution to journal › Article › peer-review

Open Access

Thermal characterization of epoxy bilayer hybrid composites reinforced with kenaf and oil palm fibers

Hanan, F., Khan, T., Jawaid, M., Sultan, M. T. H., Sebaey, T., Singh, B. & Sarmin, S. N., 01-2023, In: Polymer Composites. 44, 1, p. 444-452 9 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Thermal management of lithium-ion battery module using the phase change material

Nagmule, S. A. & Salunkhe, P. B., 2023, (Accepted/In press) In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Research output: Contribution to journal › Article › peer-review

Thin fiber metal laminates comprising functionally graded ballistic-grade fabrics subjected to mechanical and damping characterization

Pai, A., Kini, C. R., Hegde, S. & Satish Shenoy, B., 04-2023, In: Thin-Walled Structures. 185, 110628.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Variation of Shear Stresses and Flow Dynamics in Stented Patient Specific Carotid Bifurcation Model using Numerical Investigation

Almeida, N. R., Abdul Khader, S. M., Ningappa Abhilash, H., Yamaguchi, Y., Ballambat, R. P., Zuber, M., Prakashini, K., Ganesh Kamath, S., Tamagawa, M., Padmakumar, R., Rao, V. R. K. & Barboza, A. B. V., 06-2023, In: CFD Letters. 15, 6, p. 98-114 17 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Wear estimation at the contact surfaces of oval shaped hip implants using finite element analysis

Shaikh, N., Shenoy B, S., Bhat N, S., Shetty, S. & Chethan, K. N., 2023, In: Cogent Engineering. 10, 1, 2222985.

Research output: Contribution to journal › Article › peer-review

Open Access

Wear estimation of hip implants with varying chamfer geometry at the trunnion junction: a finite element analysis

Gutmann, C., Shaikh, N., Shenoy, B. S., Shaymasunder Bhat, N., Keni, L. G. & Chethan, K. N., 05-2023, In: Biomedical Physics and Engineering Express. 9, 3, 035004.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2022

5G Compact Planar Antenna for Multiple Applications

Baudha, S., Tyagi, B. & Yadav, M. V., 2022, 2022 IEEE Microwaves, Antennas, and Propagation Conference, MAPCON 2022. Institute of Electrical and Electronics Engineers Inc., p. 737-740 4 p. (2022 IEEE Microwaves, Antennas, and Propagation Conference, MAPCON 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

A compact ultra-wideband square and circular slot ground plane planar antenna with a modified circular patch

Golait, M., Varun Yadav, M., Patil, B. H., Baudha, S. & Bramhane, L. K., 25-10-2022, In: International Journal of Microwave and Wireless Technologies. 14, 8, p. 989-994 6 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

A dual-polarized antenna with circular parasitic element for autonomous vehicle

Yadav, M. V. & Baudha, S., 30-11-2022, Autonomous Vehicles: Smart Vehicles for Communication. Wiley-Blackwell, Vol. 2. p. 19-31 13 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Advances in the Whipple Shield Design and Development:: A Brief Review

Pai, A., Divakaran, R., Anand, S. & Shenoy, S. B., 03-2022, In: Journal of Dynamic Behavior of Materials. 8, 1, p. 20-38 19 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

8 Citations (Scopus)

Aerodynamic comparison of slotted and non-slotted diffuser casings for Diffuser Augmented Wind Turbines (DAWT)

Sridhar, S., Zuber, M., B., S. S., Kumar, A., Ng, E. Y. K. & Radhakrishnan, J., 06-2022, In: Renewable and Sustainable Energy Reviews. 161, 112316.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Aerodynamic Drag Reduction of Commercial Ground Vehicles Using Numerical Techniques

Saxena, S., Mahesha, G. T. & Srinivas, S., 2022, In: IOP Conference Series: Earth and Environmental Science. 1100, 1, 012013.

Research output: Contribution to journal › Conference article › peer-review

Open Access

A Finite Element Approach to Conduct Machinability Studies on Age-Hardened AA6061 Matrix Hybrid Composites

Pai, A., Keni, L. G. & Kini, C. R., 25-03-2022, In: Journal of Engineering and Technological Sciences. 54, 2, p. 332-349 18 p., 220208.

Research output: Contribution to journal › Article › peer-review

Open Access

Analysis of the Beaufort Cipher Expansion Technique and Its Usage in Providing Data Security in Cloud

Pai, D. G. & Pai, Y., 2022, Cyber Intelligence and Information Retrieval - Proceedings of CIIR 2021. Tavares, J. M. R. S., Dutta, P., Dutta, S. & Samanta, D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 49-58 10 p. (Lecture Notes in Networks and Systems; vol. 291).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Department of Aeronautical and Automobile Engineering, Manipal Institute of Technology, Manipal

Research output

Search results