Chethan K N

2025

Advancements in Surface Coatings for Enhancing Longevity in Hip Implants: A Review

Nikam, N., Shenoy B, S., K N, C., Keni, L. G., Shetty, S. & Bhat N, S., 02-2025, In: Prosthesis. 7, 1, 21.

Research output: Contribution to journal › Review article › peer-review

Open Access

Finite Element Analysis of Stress Distribution in Cancellous Bone During Dental Implant Pilot Drilling

Chethan, K. N., Shetty, N., Shetty, D., Keni, L. G., Futane, M. & Adnur, M., 02-2025, In: Prosthesis. 7, 1, 8.

Research output: Contribution to journal › Article › peer-review

Open Access

2024

Advancements in Battery Thermal Management for High-Energy-Density Lithium-Ion Batteries in Electric Vehicles: A Comprehensive Review

Shetty, D. D., Zuber, M., Chethan, K. N., Keni, L. G., Magami, I. A. B. & Kini, C. R., 09-2024, In: CFD Letters. 16, 9, p. 14-38 25 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Air-Abrasion in Dentistry: A Short Review of the Materials and Performance Parameters

Eram, A., Rajath Vinay, K. R., Chethan, K. N., Keni, L. G., Shetty, D. D., Zuber, M., Kumar, S. & Pradeep, S., 2024, In: Journal of Biomedical Physics and Engineering. 14, 1, p. 99-110 12 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

5 Citations (Scopus)

A method for estimating the contact area of a dual-mobility total hip prosthesis

Hidayat, T., Ammarullah, M. I., Saputra, E., Lamura, M. D. P., Chethan, C. N., Ismail, R., Bayuseno, A. P. & Jamari, J., 01-01-2024, In: AIP Advances. 14, 1, 015317.

Research output: Contribution to journal › Article › peer-review

Open Access

12 Citations (Scopus)

Analyzing Single Peristaltic Wave Behavior in Ureter with Variable Diameters: A Ureterdynamic Study

Keni, L. G., Satish, S. B., Chethan, K. N., Hegde, P., Prakashini, K., Tamagawa, M. & Zuber, M., 05-2024, In: CFD Letters. 16, 4, p. 54-68 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Assessment of polyethylene wear in dual mobility implant for Asians on various head-to-liner ratios: A finite-element analysis

Hidayat, T., Ammarullah, M. I., Ismail, R., Tauviqirrahman, M., Saputra, E., Lamura, M. D. P., KN, C., Bayuseno, A. P. & Jamari, A. P., 08-2024, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 238, 8, p. 943-955 13 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

CFD investigation of multiple peristaltic waves in a 3D unobstructed ureter

Keni, L. G., Satish Shenoy, B., Chethan, K. N., Hegde, P., Prakashini, K., Tamagawa, M. & Zuber, M., 03-2024, In: Biomedical physics & engineering express. 10, 2, 025011.

Research output: Contribution to journal › Article › peer-review

Open Access

Electrospun nanofibers: transformative innovations in biomedical applications and Future prospects in healthcare advancement

Das, A., Shetty, S., Chethan, K. N., Shetty, R. & Suranjan Salins, S., 2024, In: Cogent Engineering. 11, 1, 2433147.

Research output: Contribution to journal › Review article › peer-review

Open Access

Enhancing Electric Vehicle Battery Thermal Management using Phase Change Materials: A CFD Analysis for Improved Heat Dissipation

Shetty, D. D., Zuber, M., Chethan, K. N., Keni, L. G., Magami, I. A. B. & Kini, C. R., 08-2024, In: CFD Letters. 16, 8, p. 138-149 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Evaluating Angled Abutments: Three-Dimensional Finite Element Stress Analysis of Anterior Maxillary Implants

K N, C., Eram, A., Shetty, N., Shetty, D. D., Futane, M. & Keni, L. G., 04-2024, In: Prosthesis. 6, 2, p. 315-328 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

Exploring acoustic properties of banana fiber composites with elastomeric filler through a computational approach

Jayaraman, P., Pai, A., Rodriguez-Millan, M., Shenoy B, S., Chethan, K. N. & Hegde, S., 01-01-2024, In: Materials Research Express. 11, 1, 015508.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Exploring Stresses in Mandibular Jawbone during Implant Insertion: A Three-Dimensional Explicit Dynamic Analysis

K N, C., Eram, A., Shetty, N., Shetty, D. D., Futane, M. & Keni, L. G., 04-2024, In: Prosthesis. 6, 2, p. 301-314 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Impact of obstruction size on ureter dynamics: A computational investigation

Keni, L. G., Shenoy B, S., K N, C., Hegde, P., K, P., Tamagawa, M., Shetty, D. D., Futane, M. & Zuber, M., 06-2024, In: Results in Engineering. 22, 102217.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

INNOVATIVE AIRSHIP DESIGN FOR REAL-TIME AIR QUALITY MONITORING USING IOT TECHNOLOGY

Prathik, S. J., Sundaramahalingam, A., Sudhagara, R. S., Solomon, J. M., Chethan, K. N. & Keni, L. G., 2024, In: Journal of Applied Engineering Science. 22, 4, p. 727-738 12 p., 1236.

Research output: Contribution to journal › Article › peer-review

Open Access

Investigating dental structure response to air abrasion: a finite element analysis

Namlimhemnatee, T., Padmaraj, N. H., Chethan, K. N., Shetty, S., Eram, A., Shetty, N., Bamrungwong, J. & Keni, L. G., 01-03-2024, In: Materials Research Express. 11, 3, 035402.

Research output: Contribution to journal › Article › peer-review

Open Access

Investigating the Influence of All-Ceramic Prosthetic Materials on Implants and Their Effect on the Surrounding Bone: A Finite Element Analysis

Juneja, S., Miranda, G., Eram, A., Shetty, N., K N, C. & Keni, L. G., 02-2024, In: Prosthesis. 6, 1, p. 74-88 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

Hidayat, T., Ammarullah, M. I., Ismail, R., Saputra, E., Lamura, M. D. P., Chethan, K. N., Bayuseno, A. P. & Jamari, J., 2024, In: World Journal of Orthopedics. 15, 4, p. 321-336 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

12 Citations (Scopus)

OPTIMIZATION OF ELECTROSPINNING PARAMETERS USING AN ARTIFICIAL NEURAL NETWORK (ANN) MODEL FOR ENHANCED NANOFIBER PRODUCTION

Luque, F. J. L., Shetty, S., Das, A., Chethan, K. N., Keni, L. G. & Salins, S. S., 2024, In: Journal of Applied Engineering Science. 22, 4, p. 804-809 6 p., 1243.

Research output: Contribution to journal › Article › peer-review

Open Access

Optimizing stress distribution in dental air abrasion through design of experiments: a finite element analysis

K. N, C., Namlimhemnatee, T., N. H, P., Kumar, S., Eram, A., Shetty, N., Bamrungwong, J. & G. Keni, L., 2024, In: Cogent Engineering. 11, 1, 2380349.

Research output: Contribution to journal › Article › peer-review

Open Access

Patient-specific finite element analysis for assessing hip fracture risk in aging populations

Chethan, K. N., Schmidt Genannt Waldschmidt, N., Corda, J. V., Shenoy B, S., Shetty, S., Keni, L. G., Bhat N, S., Nikam, N. & Mihcin, S., 05-2024, In: Biomedical Physics and Engineering Express. 10, 3, 035006.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Unveiling the influence of one-leg stance and standing up from a chair on human hip joint prosthesis using finite element concepts

Kalayarasan, M., Dhanabal, P., Shankar, S., Chethan, K. N. & Manikandan, M., 2024, (Accepted/In press) In: Journal of Mechanics in Medicine and Biology. 2450019.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2023

Computational investigation of various stem designs with different radial clearances in total hip arthroplasty

Kalayarasan, M., Reginald, J., Valerian Corda, J., Dhanbal, P., Jain, P. S., Keni, L. G. & Chethan, K. N., 2023, In: Cogent Engineering. 10, 2, 2287296.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Enhancing Battery Thermal Management in Li-ion-Powered Electric Vehicles using Phase Change Material-based Systems: A Multi-Scale CFD Simulation Study

Shetty, D. D., Zuber, M., Chethan, K. N., Shetty, A. G., Badruddin, I. A. & Kini, C. R., 2023, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 110, 2, p. 66-78 13 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

FATIGUE LIFE EVALUATION OF DIFFERENT HIP IMPLANT DESIGNS USING FINITE ELEMENT ANALYSIS

Corda, J. V., Chethan, K. N., Satish Shenoy, B., Shetty, S., Shyamasunder Bhat, N. & Zuber, M., 2023, In: Journal of Applied Engineering Science. 21, 3, p. 896-907 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

17 Citations (Scopus)

Finite element analysis of elliptical shaped stem profile of hip prosthesis using dynamic loading conditions

Corda, J. V., K N, C., Bhat N, S., Shetty, S., Shenoy B, S. & Zuber, M., 03-11-2023, In: Biomedical physics & engineering express. 9, 6, 065028.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Non-Coking coal as an additive to enhance properties of groundnut shell reinforced polypropylene composites

Santosh, M. S., Chethan, K., Vasudev, C., Guna, V., Balaji, K. R., Gopinathan, P., Kumar, M. & Reddy, N., 12-2023, In: Journal of Thermoplastic Composite Materials. 36, 12, p. 4727-4741 15 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Static, dynamic, and fatigue life investigation of a hip prosthesis for walking gait using finite element analysis

Reginald, J., Kalayarasan, M., Chethan, K. N. & Dhanabal, P., 2023, In: International Journal of Modelling and Simulation. 43, 5, p. 797-811 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

16 Citations (Scopus)

Wear estimation at the contact surfaces of oval shaped hip implants using finite element analysis

Shaikh, N., Shenoy B, S., Bhat N, S., Shetty, S. & Chethan, K. N., 2023, In: Cogent Engineering. 10, 1, 2222985.

Research output: Contribution to journal › Article › peer-review

Open Access

23 Citations (Scopus)

Wear estimation of hip implants with varying chamfer geometry at the trunnion junction: a finite element analysis

Gutmann, C., Shaikh, N., Shenoy, B. S., Shaymasunder Bhat, N., Keni, L. G. & Chethan, K. N., 05-2023, In: Biomedical Physics and Engineering Express. 9, 3, 035004.

Research output: Contribution to journal › Article › peer-review

28 Citations (Scopus)

2022

ANALYSIS OF VIBRATION SIGNATURE IN DEEP GROOVE BALL BEARING USING FINITE ELEMENT METHOD

Keni, L. G., Padmaraj, N. H., Khan, N., Jagadeesha, P. E., Pradeep, R. & Chethan, K. N., 2022, In: Journal of Applied Engineering Science. 20, 3, p. 861-869 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Evolution of different designs and wear studies in total hip prosthesis using finite element analysis: A review

K N, C., Bhat N, S., Zuber, M. & Shenoy B, S., 2022, In: Cogent Engineering. 9, 1, 2027081.

Research output: Contribution to journal › Review article › peer-review

Open Access

26 Citations (Scopus)

Mechanical Investigation for the Use of Polylactic Acid in Total Hip Arthroplasty Using FEM Analysis

Celik, E., Alemdar, F., Bati, M., Dasdemir, M. F., Buyukbayraktar, O. A., Chethan, K. N., Kara, M. & Mihçin, Ş., 2022, Biomechanics in Medicine, Sport and Biology. Hadamus, A., Piszczatowski, S., Syczewska, M. & Błażkiewicz, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 17-23 7 p. (Lecture Notes in Networks and Systems; vol. 328 LNNS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

9 Citations (Scopus)

Optimization of Hip Implant Designs Based on Its Mechanical Behaviour

Göktaş, H., Subaşi, E., Uzkut, M., Kara, M., Biçici, H., Shirazi, H., Chethan, K. N. & Mihçin, Ş., 2022, Biomechanics in Medicine, Sport and Biology. Hadamus, A., Piszczatowski, S., Syczewska, M. & Błażkiewicz, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 37-43 7 p. (Lecture Notes in Networks and Systems; vol. 328 LNNS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

16 Citations (Scopus)

SLIDING WEAR CHARACTERISTICS OF BORON CARBIDE AND NOVEL SQUID QUILL ASH REINFORCED ALUMINIUM 6061 HYBRID COMPOSITES

Padmaraj, N. H., Keni, L. G., Chethan, K. N., Hegde, S., Nithin, I. R., Kumar, A. & Mendon, A., 2022, In: Journal of Applied Engineering Science. 20, 2, p. 590-596 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Static structural analysis of the effect of change in femoral head sizes used in Total Hip Arthroplasty using finite element method

Bhawe, A. K., Shah, K. M., Somani, S., Shenoy B, S., Bhat N, S., Zuber, M. & K N, C., 2022, In: Cogent Engineering. 9, 1, 2027080.

Research output: Contribution to journal › Article › peer-review

Open Access

29 Citations (Scopus)

2021

An experimental investigation of the effect of natural fiber treatment and marine environment on cannabis sativa/epoxy laminates

Chethan, K. N., Sharun, H., Kumar, R. & Padmaraj, N. H., 2021, In: Journal of Applied Engineering Science. 19, 3, p. 841-847 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Conceptual design and analysis of a car bumper using finite element method

G Keni, L., Singh, V., Singh, N., Thyagi, A., Kalburgi, S. & Chethan, K. N., 2021, In: Cogent Engineering. 8, 1, 1976480.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

Experimental and Numerical Study for Estimation and Reduction of The Blind Spot in A Passenger Car

Thara, R. I. V., Zuber, M., Gupta, S., Agarwal, A., Hegde, S. & Chethan, K. N., 11-2021, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 87, 2, p. 66-81 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Finite element analysis of hip implant with varying in taper neck lengths under static loading conditions

Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 09-2021, In: Computer Methods and Programs in Biomedicine. 208, 106273.

Research output: Contribution to journal › Article › peer-review

30 Citations (Scopus)

Numerical Analysis and Fabrication of Battery Holder for Two Wheelers

Sabarinathan, V., Vivek, R. R., Chethan, K. N. & Mahesh, G. T., 02-2021, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 78, 2, p. 114-131 18 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

2020

Computational fluid dynamics study of cricket ball aerodynamics associated with swing

Kalburgi, S., Rathi, A., Narayan, M., Keni, L. G., Chethan, K. N. & Zuber, M., 2020, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 75, 2, p. 125-136 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Investigation of the effect of different cooling medium on the physical and tribological properties of heat treated en 31 and en 8 steel

Das, S., Kandulna, F., Phukhan, M., Pal, H., Chethan, K. N. & Ghadai, R. K., 02-11-2020, 2nd International Conference on Mechanical Materials and Renewable Energy, ICMMRE 2019. Gao, X.-Z., Ghadai, R. K., Kalita, K., Shivakoti, I., Kilickap, E., Kundu, T. & Das, S. (eds.). American Institute of Physics Inc., 030011. (AIP Conference Proceedings; vol. 2273).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access