Pavan Hiremath

2023

Influence of Thermal and Thermomechanical Stimuli on Dental Restoration Geometry and Material Properties of Cervical Restoration: A 3D Finite Element Analysis

Sharma Uppangala, R., Pai, S., Patil, V., Smriti, K., Naik, N., Shetty, R., Gunasekar, P., Jain, A., Tirupathi, J., Hiremath, P., Patil, S. & Rathnakar, R., 01-2023, In: Journal of Composites Science. 7, 1, 6.

Research output: Contribution to journal › Article › peer-review

Open Access

Mechanical Properties of Post-Cured Eggshell-Filled Glass-Fibre-Reinforced Polymer Composites

Kowshik, S., Sharma, S., Rao, S., Shettar, M. & Hiremath, P., 02-2023, In: Journal of Composites Science. 7, 2, 49.

Research output: Contribution to journal › Article › peer-review

Open Access

2022

Artificial Neural Network for Predicting Hardness of Multistage Solutionized and Artificially Aged LM4 + TiB2 Composites

Srinivas, D., Shankar, G., Sharma, S., Shettar, M. & Hiremath, P., 2022, In: Materials Research. 25, e20210557.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Damage Tolerance of a Stiffened Composite Panel with an Access Cutout under Fatigue Loading and Validation Using FEM Analysis and Digital Image Correlation

Hiremath, P., Viswamurthy, S. R., Shettar, M., Naik, N. & Kowshik, S., 12-2022, In: Fibers. 10, 12, 105.

Research output: Contribution to journal › Article › peer-review

Open Access

Investigation on the Effects of Uncarbonised, Carbonised and Hybrid Eggshell Filler Addition on the Mechanical Properties of Glass Fibre/Polyester Composites

Kowshik, S., Sharma, S., Rao, S. U., Shettar, M., Hiremath, P. & Upadhyaya, A., 2022, In: Engineered Science. 18, p. 121-@131 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

Optimization of the Parameters Influencing the Control of Dual-Phase AISI1040 Steel Corrosion in Sulphuric Acid Solution with Pectin as Inhibitor Using Response Surface Methodology

Prabhu, D., Hiremath, P., Prabhu, P. R. & Gowrishankar, M. C., 04-2022, In: Protection of Metals and Physical Chemistry of Surfaces. 58, 2, p. 394-413 20 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Spider web approach hardness validation of peak aged Al6061/SiC/h-BN composite and related mechanical characterization

Shivaprakash, Y. M., Gurumurthy, B. M., Hiremath, P., Sharma, S. & Sowrabh, B. S., 2022, In: Manufacturing Review. 9, 24.

Research output: Contribution to journal › Article › peer-review

Open Access

Water Sorption-Desorption-Resorption Effects on Mechanical Properties of Epoxy-Nanoclay Nanocomposites

Shettar, M., Kowshik, S., Gowrishankar, Hiremath, P. & Sharma, S., 2022, In: International Journal of Automotive and Mechanical Engineering. 19, 1, p. 9478-9486 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

2021

Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 M H₂SO₄ using pectin as inhibitor

Prabhu, P. R., Hiremath, P., Prabhu, D., Gowrishankar, M. C. & Gurumurthy, B. M., 11-2021, In: Chemical Papers.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

Effect of intercritical processing temperature on mechanical properties, microstructure and microhardness of ferrite - bainite medium carbon dual phase steels

B M, G., Kini U, A., Sharma, S., Hiremath, P. & M C, G., 2021, In: Cogent Engineering. 8, 1, 1999062.

Research output: Contribution to journal › Article › peer-review

Open Access

Influence of normalizing post carburizing treatment on microstructure, mechanical properties and fracture behavior of low alloy gear steels

Hiremath, P., Gowrishankar, M. C., Shettar, M., Sharma, S., Jayashree, P. K. & Kowshik, S., 2021, In: AIMS Materials Science. 8, 5, p. 836-851 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Investigation on tensile properties and analysis of wear property of glass fiber-epoxy-nanoclay ternary nanocomposite using response surface methodology

Hiremath, P., Kini U, A., Shettar, M., Sharma, S. & P K, J., 2021, In: Cogent Engineering. 8, 1, 1877869.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

The effect of SiC content in aluminum-based metal matrix composites on the microstructure and mechanical properties of welded joints

Pk, J., Gowrishankar, M. C., Sharma, S., Shetty, R., Hiremath, P. & Shettar, M., 2021, In: Journal of Materials Research and Technology. 12, p. 2325-2339 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

10 Citations (Scopus)

Tribolayer Behaviour and Wear of Artificially Aged AI6061 Hybrid Composites

Shettar, M., Hiremath, P., Shankar, G., Kini, A. & Sharma, S., 06-2021, In: International Journal of Automotive and Mechanical Engineering. 18, 2, p. 8668-8676 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

2020

Coated and uncoated reinforcements metal matrix composites characteristics and applications–A critical review

B M, K., M C, G., Sharma, S., Hiremath, P., Shettar, M. & Shetty, N., 2020, In: Cogent Engineering. 7, 1, 1856758.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

COVID 19: Impact of lock-down on mental health and tips to overcome

Hiremath, P., Suhas Kowshik, C. S., Manjunath, M. & Shettar, M., 06-2020, In: Asian Journal of Psychiatry. 51, 102088.

Research output: Contribution to journal › Article › peer-review

Open Access

116 Citations (Scopus)

Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

7 Citations (Scopus)

Experimental investigation on mechanical and wear properties of nanoclay-epoxy composites

Shettar, M., Kowshik, C. S. S., Manjunath, M. & Hiremath, P., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 9108-9116 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

28 Citations (Scopus)

Experimental validity on the casting characteristics of stir cast aluminium composites

Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, In: Journal of Materials Research and Technology.

Research output: Contribution to journal › Article › peer-review

Open Access

26 Citations (Scopus)

Hygrothermal chamber aging effect on mechanical behavior and morphology of glass fiber-epoxy-nanoclay composites

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, G. C. G., 01-01-2020, In: Materials Research Express. 7, 1, 015318.

Research output: Contribution to journal › Article › peer-review

Open Access

14 Citations (Scopus)

Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

Research output: Contribution to journal › Article › peer-review

Open Access

9 Citations (Scopus)

Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

Research output: Contribution to journal › Article › peer-review

Open Access

9 Citations (Scopus)

Study of cycle time reduction and assembly process improvement for various electric stackers

Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

Research output: Contribution to journal › Article › peer-review

Video assisted education on knowledge and practices of house wives towards prevention of Dengue Fever at Gokak Taluk, Karnataka, India

Hiremath, P., Chakrabarty, J. & Sequira, L., 02-09-2020, In: International Journal of Health Promotion and Education.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2019

Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

Analysis of drag and lift forces in different tailed ground effect vehicles

Hiremath, P., Shettar, M., Suhas Kowshik, C. S., Rajath, J. & Sukhesh, P. D., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1399-1412 14 p.

Research output: Contribution to journal › Article › peer-review

Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

Research output: Contribution to journal › Article › peer-review

18 Citations (Scopus)

Experimental investigation on the tensile and flexural strength of nano-polymer composites

Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

Research output: Contribution to journal › Article › peer-review

Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Investigation and optimization of thermal shock effects on the properties and microstructure of Nanoclay-Glass Fiber Reinforced Epoxy Composites

Shettar, M., Achutha Kini, U., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 11-09-2019, In: Materials Research Express. 6, 10, 105360.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In: Materials Research Express. 6, 1, 015206.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journal › Article › peer-review

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journal › Article › peer-review

Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

2018

Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Investigation on Effect of Egg Shell Powder on Mechanical Properties of GFRP Composites

Hiremath, P., Shettar, M., Shankar, M. C. G. & Mohan, N. S., 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 3014-3018 5 p.

Research output: Contribution to journal › Article › peer-review

28 Citations (Scopus)

Multi body and fatigue life cycle analysis of the lower control arm of suspension system of an all-terrain vehicle

Naik, N., Suhas Kowshik, C. S., Varghese, G., Hiremath, P. & Bhat, R., 01-12-2018, In: International Journal of Mechanical Engineering and Technology. 9, 13, p. 1610-1620 11 p.

Research output: Contribution to journal › Article › peer-review

2017

Investigation of the mechanical properties of glass fiber - chicken feather hybrid composite

Hiremath, P., Shettar, M., Gowrishankar, M. C., Chauhan, V. R. & Nikhil, R., 01-01-2017, In: International Journal of Technology. 8, 3, p. 408-417 10 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Investigation on Effect of Aluminium Hydroxide on Mechanical and Fire Retardant Properties of GFRP- Hybrid Composites

Hiremath, P., Arunkumar, H. S. & Shettar, M., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 10952-10956 5 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

Research output: Contribution to journal › Article › peer-review

22 Citations (Scopus)

2016

Investigation on mechanical and physical properties of GFRP-Egg shell powder hybrid composites

Hiremath, P., Shettar, M. & Gowrishankar, M. C., 01-08-2016, In: Indian Journal of Science and Technology. 9, 32, 97024.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

2015

Effect of seawater on mechanical properties of GFRP with cement as filler material for fishing boat application

Shettar, M. & Hiremath, P., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 19, p. 40027-40030 4 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Fabrication and experimental study on optimization of process parameters for drilling of GFRP with iron ore as filler material using Taguchi and ANOVA

Chauhan, V. R., Dinesh, K. R., Hiremath, P., Shettar, M., Veeresh, K. & Algur, V., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 22, p. 43195-43198 4 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Pavan Hiremath

Research output

Search results