Find Research outputs

Search results

• Conference article

  Experimental investigation on dielectric properties of composites using Taguchi technique

  Shankar, B. S. M., Mathias, K. A. & Kulkarni, S. M., 01-01-2020, In: Materials Today: Proceedings. 27, p. 140-143 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Experimental Investigation on Surface Quality and Dimensional Accuracy during Curvilinear Thin-Wall Machining

  Bolar, G., Mekonen, M., Das, A. & Joshi, S. N., 2018, In: Materials Today: Proceedings. 5, 2, p. 6461-6469 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Experimental Studies on Al (5.7% Zn) Alloy based Hybrid MMC

  Shivaprakash, Y. M., Ramu, H. C., Chiranjivee, Kumar, R. & Kumar, D., 03-03-2018, In: IOP Conference Series: Materials Science and Engineering. 310, 1, 012004.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite

  Shivaprakash, Y. M., Sarkar, A., Jha, S., Singh, M. & Bangera, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02002.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Experimental studies on twin PTCs driven by dual piston head linear compressor

  Gour, A. S., Joy, J., Sagar, P., Sudharshan, H., Mallappa, A., Karunanithi, R. & Jacob, S., 01-03-2017, In: IOP Conference Series: Materials Science and Engineering. 171, 1, 012075.

  Research output: Contribution to journal › Conference article › peer-review

• Experimental validation of energy parameters in parabolic trough collector with plain absorber and analysis of heat transfer enhancement techniques

  Bilal, F. R., Arunachala, U. C. & Sandeep, H. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review
  15 Citations (Scopus)

• Exploring Energy Conservation in Office Buildings with Thermal Comfort Criterion Towards Sustainable New Developments in Warm and Humid Climate

  Kini, P., Garg, N. K. & Kamath, K., 01-03-2017, In: Energy Procedia. 111, p. 277-286 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  7 Citations (Scopus)

• Fabrication and characterization of ZnO/AI/ZnO multilayers by simultaneous DC and RF magnetron sputtering

  Nagaraja, K. K., Kumar, A. S. & Nagaraja, H. S., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012071.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

  Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In: Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)

• Fabrication and performance analysis of concentrated hybrid photovoltaic system

  Murthy, K., Daniel, A., Concessao, L., Roy, H. A. & Ganesha, A., 09-01-2018, In: MATEC Web of Conferences. 144, 04023.

  Research output: Contribution to journal › Conference article › peer-review

• Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

  Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In: IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review
  8 Citations (Scopus)

• Fake News Detection from Online media using Machine learning Classifiers

  Pandey, S., Prabhakaran, S., Reddy, N. V. S. & Acharya, D., 11-01-2022, In: Journal of Physics: Conference Series. 2161, 1, 012027.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  8 Citations (Scopus)

• Finite element model for analysis of vibration damping characteristics of isotropic surface structures

  Pai, A., Kini, C. R. & Satish Shenoy, B., 2022, In: Materials Today: Proceedings. 52, p. 518-523 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Flying smart: Smart materials used in aviation industry

  Sharma, K. & Srinivas, G., 01-01-2020, In: Materials Today: Proceedings. 27, p. 244-250 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  20 Citations (Scopus)

• Forecasting variance of NiftyIT index with RNN and DNN

  Karthik, C. R., Raghunandan, Rao, B. A. & Reddy, N. V. S., 11-01-2022, In: Journal of Physics: Conference Series. 2161, 1, 012005.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Friction stir welding of Aluminium matrix composites - A Review

  Subramanya, P., Amar, M., Arun, S., Mervin, H. & Shrikantha, R., 09-01-2018, In: MATEC Web of Conferences. 144, 03002.

  Research output: Contribution to journal › Conference article › peer-review
  15 Citations (Scopus)

• Geometrical guidance algorithm for soft landing on lunar surface

  Rijesh, M. P., Sijo, G., Philip, N. K. & Natarajan, P., 01-01-2014, In: IFAC Proceedings Volumes (IFAC-PapersOnline). 3, PART 1, p. 14-19 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Global kinetic modeling of low-temperature NH₃-SCR for NOx removal using Cu-BEA catalyst

  Mohan, S. & Dinesha, P., 2022, In: Materials Today: Proceedings. 52, p. 1321-1325 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Green synthesis and structural characterization of silver nanoparticles synthesized using the pod extract of Clitoria ternatea and its application towards dye degradation

  Varadavenkatesan, T., Vinayagam, R. & Selvaraj, R., 01-01-2019, In: Materials Today: Proceedings. 23, p. 27-29 3 p.

  Research output: Contribution to journal › Conference article › peer-review
  36 Citations (Scopus)

• Green synthesis of silver nanoparticles using Thunbergia grandiflora flower extract and its catalytic action in reduction of Congo red dye

  Varadavenkatesan, T., Selvaraj, R. & Vinayagam, R., 01-01-2019, In: Materials Today: Proceedings. 23, p. 39-42 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  54 Citations (Scopus)

• Grouping of Distributed Data at Multiple Sites by Sustaining the Privacy of Data

  Sumana, M. & Hareesha, K. S., 01-01-2020, In: Procedia Computer Science. 171, p. 1688-1697 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Grow-IoT (smart analytics app for comprehensive plant health analysis and remote farm monitoring using smart sensors)

  Nigam, R., Rao, M., Dias, N. R., Hariharan, A., Choraria, A., Tendolkar, A. & Manohara Pai, M. M., 11-01-2022, In: Journal of Physics: Conference Series. 2161, 1, 012059.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Haemodynamic study of Flow in concentric and eccentric stenosed carotid Artery

  Khader, S. M. A., Pai, R., Kamath, G., Zuber, M. & Rao, V. R. K., 09-01-2018, In: MATEC Web of Conferences. 144, 01024.

  Research output: Contribution to journal › Conference article › peer-review

• Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites

  Hegde, N. T., Pai, D. & Hegde, R., 01-01-2019, In: Materials Today: Proceedings. 19, p. 810-817 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  9 Citations (Scopus)

• Hemodynamics of Idealized Carotid Artery

  Puritipati, C., Keri, V. & Kumar, N., 09-01-2018, In: MATEC Web of Conferences. 144, 01020.

  Research output: Contribution to journal › Conference article › peer-review

• Highly Improved DNA Based Steganography

  Malathi, P., Manoaj, M., Manoj, R., Raghavan, V. & Vinodhini, R. E., 2017, In: Procedia Computer Science. 115, p. 651-659 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  37 Citations (Scopus)

• Hydrodynamic analysis of floating offshore wind turbine

  Chodnekar, Y. P., Mandal, S. & Balakrishna Rao, K., 2015, In: Procedia Engineering. 116, 1, p. 4-11 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  10 Citations (Scopus)

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review
  14 Citations (Scopus)

• 'I can write two but not 2': Evidence for domain-specific within-modality dissociation for number digits

  Krishnan, G., Pai, A., Tiwari, S. & Rao, S. N., 20-10-2011, In: Procedia - Social and Behavioral Sciences. 23, p. 73-74 2 p.

  Research output: Contribution to journal › Conference article › peer-review

• Identification of Microplastics Using a Custom Built Micro-Raman Spectrometer

  Unnimaya, S., Mithun, N., Lukose, J., Nair, M. P., Gopinath, A. & Chidangil, S., 2023, In: Journal of Physics: Conference Series. 2426, 1, 012007.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Image Captioning and Comparison of Different Encoders

  Pal, A., Kar, S., Taneja, A. & Jadoun, V. K., 13-05-2020, In: Journal of Physics: Conference Series. 1478, 1, 012004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Impact of wall slip on the sliding surfaces of lemon bearings operated with non-Newtonian lubricants

  Murthy Ambekar, A. & Raghunandana, K., 2022, In: Materials Today: Proceedings. 52, p. 1763-1770 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Implementation of lean techniques for sustainable workflow process in Indian motor manufacturing unit

  Mahajan, M., Chistopher, K. B., Harshan & Shiva Prasad, H. C., 01-01-2019, In: Procedia Manufacturing. 35, p. 1196-1204 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  9 Citations (Scopus)

• Improved anomaly detection based on integrated multi-scale principal component analysis using wavelets: An application to high dimensional processes

  Ramakrishna Kini, K. & Madakyaru, M., 2020, In: IFAC-PapersOnLine. 53, 1, p. 398-403 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Improvement in productivity through TPM Implementation

  Thorat, R. & Mahesha, G. T., 01-01-2020, In: Materials Today: Proceedings. 24, p. 1508-1517 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  11 Citations (Scopus)

• Improvement of Overall Equipment Efficiency of Machine by SMED

  Bhade, S. & Hegde, S., 2018, In: Materials Today: Proceedings. 24, p. 463-472 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)

• Index Generation and Secure Multi-user Access Control over an Encrypted Cloud Data

  Raghavendra, S., Meghana, K., Doddabasappa, P. A., Geeta, C. M., Buyya, R., Venugopal, K. R., Iyengar, S. S. & Patnaik, L. M., 2016, In: Procedia Computer Science. 89, p. 293-300 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  10 Citations (Scopus)

• Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology

  Mohan, N. S. & Kulkarni, S. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012031.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Influence of Farmer demographics and Supply Chain Issues on Organized Retailer Performance

  Prabhu, A., Giridhar Kamath, B., Karthik, A. & Sinha, K., 09-01-2018, In: MATEC Web of Conferences. 144, 05010.

  Research output: Contribution to journal › Conference article › peer-review

• Influence of filler and processing parameters on the mechanical properties of dielectric elastomer composites

  Shankar, B. S. M., Mathias, K. A. & Kulkarni, S. M., 01-01-2020, In: Materials Today: Proceedings. 27, p. 221-226 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)

• Influence of filler on dielectric properties of silicone rubber particulate composite material

  Mathias, K. A., Shivashankar, H., Manohar Shankar, B. S. & Kulkarni, S. M., 2020, In: Materials Today: Proceedings. 33, p. 5623-5627 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Influence of marine environment on mechanical properties of glass fiber reinforced composites

  Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)

• Influence of Molar Concentration on the Structure and Optical Properties of ZnO Films Grown by Spray Pyrolysis Method

  Sindhu, H. S., Joishy, S., Rajendra, B. V. & Babu, P. D., 01-01-2018, In: IOP Conference Series: Materials Science and Engineering. 360, 1, 012051.

  Research output: Contribution to journal › Conference article › peer-review

• Influence of post curing on GFRP hybrid composite

  Chavan, V. R., DInesh, K. R., Veeresh, K., Algur, V. & Shettar, M., 09-01-2018, In: MATEC Web of Conferences. 144, 02011.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)

• Influence of Sawdust Bio-filler on the Tensile, Flexural, and Impact Properties of Mangifera Indica Leaf Stalk Fibre Reinforced Polyester Composites

  Heckadka, S. S., Nayak, S. Y., Gouthaman, P. V., Talwar, A., Ravishankar, V. A., Thomas, L. G. & Mathur, A., 09-01-2018, In: MATEC Web of Conferences. 144, 02024.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)

• Influence of stacking sequence on the mechanical properties of 3D E-glass/bamboo non-woven hybrid epoxy composites

  Nayak, S. Y., Shenoy, B. S., Sultan, M. T. B. H., Kini, C. R., Shenoy, K. R., Acharya, A. & Jaideep, J. P., 2020, In: Materials Today: Proceedings. 38, p. 2431-2438 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  9 Citations (Scopus)

• Influence of wear parameters on the tribological characteristics of jute/e-glass epoxy hybrid composites of different weave architecture

  Shenoy Heckadka, S., Nayak, S. Y., Samant, R., Malik, A. & Aurichelle Magne Kam, V., 2020, In: Materials Today: Proceedings. 47, p. 6776-6782 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Innovative small satellite structural concept for effective system integration

  Saikia, A., 01-01-2016, In: Proceedings of the International Astronautical Congress, IAC.

  Research output: Contribution to journal › Conference article › peer-review

• Integrated coastal zone management plan and coastal zone information system for Mangalore Coast, West Coast of India

  Dwarakish, G. S., Shetty, D., Rajarama, Pai, J. & Natesan, U., 2006, In: Proceedings of SPIE - The International Society for Optical Engineering. 6406, 64060Q.

  Research output: Contribution to journal › Conference article › peer-review