Find Research outputs

Search results

• Conference article

  Development and evaluation of radiopaque, light cure composite

  Valiathan, A., Krishnan, V. K., Mohanty, M. & Bhat, K. S., 29-05-1999, In: Biomedical Sciences Instrumentation. 35, p. 421-426 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Development and investigation on elastic plastic fracture analysis of Al6082 reinforced alumina/aluminium silicate MMCs using Taguchi approach

  Puneeth, N., Satheesh, J., Naveen, G. J., Mohan, N., Bhandari, L. & Kiran, G., 2019, In: Materials Today: Proceedings. 27, p. 2243-2248 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Development of short areca fiber reinforced biodegradable composite material

  Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In: Procedia Engineering. 64, p. 966-972 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  24 Citations (Scopus)

• Dry sliding wear behaviour of Ta/NbC filled glass-epoxy composites at elevated temperatures

  Mohan, N., Mahesha, C. R., Shivarudraiah, Mathivanan, N. R. & Shivamurthy, B., 2013, In: Procedia Engineering. 64, p. 1166-1172 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  10 Citations (Scopus)

• Dynamic 3D graph visualizations in Julia

  Anilkumar, A., Mathew, K. T., Mulimani, M., Koolagudi, S. & Jamadagni, C., 2016, In: Simulation Series. 48, 9, p. 147-154 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Dynamic characteristics of drilling spindle supported by radial permanent magnet bearings

  Chalageri, G. R., Bekinal, S. I. & Doddamani, M., 13-05-2020, In: Materials Today: Proceedings. 28, p. 2190-2196 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Effect of air annealing on photo detecting properties of S-SILAR deposited SnS films

  Kumar, P. & Rao, G. K., 2022, In: Materials Today: Proceedings. 55, p. 17-21 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of annealing temperature on the structural and optical properties of zinc oxide (ZnO) thin films prepared by spin coating process

  Sanjeev, S. & Kekuda, D., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012149.

  Research output: Contribution to journal › Conference article › peer-review
  41 Citations (Scopus)

• Effect of bamboo char and boron carbide particles on mechanical characteristics of Aluminum 6061 hybrid composites

  Chethan, K. N., Pai, A., Padmaraj, N. H., Singhal, A. & Sinha, S., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012038.

  Research output: Contribution to journal › Conference article › peer-review
  9 Citations (Scopus)

• Effect of Bi³⁺on magnetic properties of nanosized La_0.7-xBi_xSr_0.3MnO₃

  Souza, A. D., Rayaprol, S. & Mamatha Daivajna, D., 2020, In: Materials Today: Proceedings. 47, p. 635-640 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of bio-ethanol on the performance and emission of a biodiesel fueled compression ignition engine

  Bhat, S. N., Shenoy, S. & Dinesha, P., 09-01-2018, In: MATEC Web of Conferences. 144, 04017.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Effect of Cadmium Dopant on Structure and Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique

  Joishy, S., Sindhu, H. S. & Rajendra, B. V., 01-01-2018, In: IOP Conference Series: Materials Science and Engineering. 360, 1, 012050.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Effect of chemical treatment on the physical and mechanical properties of flax fibers: A comparative assessment

  Nayak, S. Y., Shenoy Heckadka, S., Seth, A., Prabhu, S., Sharma, R. & Shenoy, K. R., 2020, In: Materials Today: Proceedings. 38, p. 2406-2410 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (SciVal)

• Effect of cold work and thermal ageing on corrosion and mechanical behavior of Cr-Mn ASS

  Shukla, S., Patil, A. P., Bansod, A. V. & Tandon, V., 2018, In: Materials Today: Proceedings. 5, 9, p. 17769-17777 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Effect of combined U-shaped and semi-circular rib on heat transfer augmentation of solar air heater-A CFD study

  Manjunath, M. S., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012206.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Effect of deposition parameters on Structural and Optical Properties of ZnS Thin Films

  Priya, K., Gowrish Rao, K. & Sanjeev, G., 2018, In: IOP Conference Series: Materials Science and Engineering. 360, 1, 012042.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Effect of gas tungsten arc welding on the microstructural, mechanical and corrosion properties of Ti-stabilized 439 ferritic stainless steel

  Gupta, S. K., Patil, A. P., Rathod, R. C., Tandon, V. & Ambade, S., 2021, In: Materials Today: Proceedings. 50, p. 1570-1574 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of graphene on the performance of heat exchangers and related simulation studies

  Natesan, K., Prabhu S., S., Varghese Kodathu, S. & Verma, R., 2021, In: Materials Today: Proceedings. 46, p. 8359-8365 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of hybridization on the mechanical properties of chopped strand mat/pineapple leaf fibre reinforced polyester composites

  Nayak, S. Y., Heckadka, S. S., Amin, N. M., Sadanand, R. V. & Thomas, L. G., 26-02-2018, In: MATEC Web of Conferences. 153, 01006.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• EFFECT of INJECTION PRESSURE and INJECTION TIMING on A SEMI-ADIABATIC CI ENGINE FUELED with BLENDS of JATROPHA OIL METHYL ESTERS

  Dhananjaya, D. A., Mohanan, P. & Sudhir, C. V., 09-01-2008, In: SAE Technical Papers. 2008-September, September

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Effect of microwave irradiation power for the morphological changes of ZnO nanoparticles

  Pavithra, K. S., Fasiulla, Yashoda, M. P. & Prasannakumar, S., 09-12-2019, In: IOP Conference Series: Materials Science and Engineering. 577, 1, 012120.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Effect of Mn substitution on the thermal expansion of EuBa₂Cu₃O_7-δ

  Rao, A., 01-01-2012, In: Physics Procedia. 36, p. 606-610 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of silver doping on structural and optical properties of starch capped ZnS nanoparticles synthesized by microwave irradiation

  Lalitha Devi, B., Mohan Rao, K. & Ramananda, D., 2022, In: Materials Today: Proceedings. 55, p. 179-185 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of UWS spray angle and positioning of injector on ammonia concentration in Urea-SCR system

  Sadashiva Prabhu, S., Natesan, K. & Shivappa Nayak, N., 2021, In: Materials Today: Proceedings. 46, p. 8051-8055 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)

• Effect of volumetric heat capacity of chill material on the hardness and thermal diffusivity of Al6061-quartz composite

  Hiremath, A., 2019, In: Materials Today: Proceedings. 28, p. 2241-2246 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effects of low pressure plasma irradiation on electrical resistivity of perovskite oxide Eu _1-x Sr _x MnO ₃

  Deka, U. & Rao, A., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012173.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Efficacy of air heat exchanger based decay heat removal system through passive mode: A numerical study

  Elton, D. N., Arunachala, U. C. & Dolfred, V. F., 2019, In: Materials Today: Proceedings. 28, p. 2286-2294 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Energy Conservation Building Code (ECBC) based optimum wall composition with respect to thermal transmittance and thickness for different commercial pockets of Tier-1 city in temperate climatic zone of India

  Shetty, S., Kishore, P., Kini, P., Acharya, R. R. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 229-236 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  4 Citations (Scopus)

• Energy Efficient Design and Modification of an Automotive Exhaust Muffler for Optimum Noise, Transmission loss, Insertion loss and Back pressure: A Review

  Christopher George, T. & Vinod Raj, H. G., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012127.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Enhancement of fetal electrocardiogram by simultaneous cancellation of maternal ecg component and baseline wander

  Padmashri, T. K. & Niranjan, U. C., 01-12-1996, In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. 5, p. 2261-2262 2 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Enhancement of Security of Diffie-Hellman Key Exchange Protocol using RSA Cryptography

  Gupta, C. & Reddy, N. V. S., 11-01-2022, In: Journal of Physics: Conference Series. 2161, 1, 012014.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• Enhancing shear capacity of masonry wallet using PP-band and steel wire mesh

  Banerjee, S., Nayak, S. & Das, S., 15-11-2018, In: IOP Conference Series: Materials Science and Engineering. 431, 7, 072004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  9 Citations (Scopus)

• Enhancing the mechanical properties of jute fiber reinforced green composites varying cashew nut shell liquid composition and using mercerizing process

  Naik, N., Shivamurthy, B., Thimappa, B. H. S., Govil, A., Gupta, P. & Patra, R., 01-01-2019, In: Materials Today: Proceedings. 19, p. 434-439 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Evaluating the design for additive manufacturing: A process planning perspective

  Zhang, Y., Bernard, A., Gupta, R. K. & Harik, R., 2014, In: Procedia CIRP. 21, p. 144-150 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  47 Citations (Scopus)

• Evaluation and management of customer feedback to include market dynamics into product development: Satisfaction importance evaluation (SIE) model

  Kumar, G. R., Farouk, B. & Alain, B., 2017, In: Proceedings of the International Conference on Engineering Design, ICED. 4, DS87-4, p. 327-336 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  8 Citations (Scopus)

• Evaluation of conventional drilling and helical milling for processing of holes in titanium alloy Ti6Al4V

  Barman, A., Adhikari, R. & Bolar, G., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2295-2300 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  14 Citations (Scopus)

• Evaluation of properties of Glass Ionomer Cement reinforced with Zinc Oxide nanoparticles - An in vitro study

  Agarwal, P., Nayak, R., Upadhya, P. N., Ginjupalli, K. & Gupta, L., 01-01-2018, In: Materials Today: Proceedings. 5, 8, p. 16065-16072 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  8 Citations (Scopus)

• Evaluation of the mechanical characteristics of hygrothermally aged 2-D basalt-aramid/epoxy hybrid interply composites

  Pai, Y., Pai, D. K. & Kini, M. V., 17-11-2021, In: Journal of Physics: Conference Series. 2070, 1, 012234.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Experimental and numerical analysis of convergent nozzlex

  Srinivas, G. & Rakham, B., 01-01-2017, In: IOP Conference Series: Materials Science and Engineering. 197, 1, 012081.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Experimental and numerical investigation of mode II failure behavior evaluation using three point bend, end notched flexure test

  Nikhil, R., Shivakumar, S., Anupama, K. & Manjunath, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02009.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Experimental investigation into helical hole milling of fiber metal Laminates

  Hemant, K., Kona, A., Karthik, S. A. & Bolar, G., 01-01-2020, In: Materials Today: Proceedings. 27, p. 208-216 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Experimental investigation of humidification efficiency of a structured packing-based counter flow humidification system

  Salins, S. S., Reddy, S. V. K. & Shivakumar, 2020, In: International Conference on Fluid Flow, Heat and Mass Transfer. p. 156-1-156-11

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Experimental investigation of joint properties of friction stir welded aluminium matrix composite

  Prabhu B, S. R., Shettigar, A., Herbert, M. A. & Rao, S. S., 2021, In: Materials Today: Proceedings. 46, p. 8917-8920 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Experimental investigation on dielectric properties of composites using Taguchi technique

  Shankar, B. S. M., Mathias, K. A. & Kulkarni, S. M., 01-01-2020, In: Materials Today: Proceedings. 27, p. 140-143 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Experimental Investigation on Surface Quality and Dimensional Accuracy during Curvilinear Thin-Wall Machining

  Bolar, G., Mekonen, M., Das, A. & Joshi, S. N., 2018, In: Materials Today: Proceedings. 5, 2, p. 6461-6469 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Experimental Studies on Al (5.7% Zn) Alloy based Hybrid MMC

  Shivaprakash, Y. M., Ramu, H. C., Chiranjivee, Kumar, R. & Kumar, D., 03-03-2018, In: IOP Conference Series: Materials Science and Engineering. 310, 1, 012004.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite

  Shivaprakash, Y. M., Sarkar, A., Jha, S., Singh, M. & Bangera, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02002.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Experimental studies on twin PTCs driven by dual piston head linear compressor

  Gour, A. S., Joy, J., Sagar, P., Sudharshan, H., Mallappa, A., Karunanithi, R. & Jacob, S., 01-03-2017, In: IOP Conference Series: Materials Science and Engineering. 171, 1, 012075.

  Research output: Contribution to journal › Conference article › peer-review

• Experimental validation of energy parameters in parabolic trough collector with plain absorber and analysis of heat transfer enhancement techniques

  Bilal, F. R., Arunachala, U. C. & Sandeep, H. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review
  15 Citations (Scopus)

• Exploring Energy Conservation in Office Buildings with Thermal Comfort Criterion Towards Sustainable New Developments in Warm and Humid Climate

  Kini, P., Garg, N. K. & Kamath, K., 01-03-2017, In: Energy Procedia. 111, p. 277-286 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  7 Citations (Scopus)