Application of biomass-based wood shaving packing in a liquid desiccant dehumidification system–a source of sustainable energy

The present work focuses on the construction of a counter flow dehumidification test rig where calcium chloride liquid is used as the desiccant and is made to spray on the novel organic packing made of wood shaving with different densities and porosities. The mass flow rate of the air is varied and the performance parameters such as moisture removal rate (MRR), dehumidification effectiveness, coefficient of performance (COP), sensible heat factor (SHR) and mass transfer coefficient have been investigated. Results demonstrated an increase in the relative humidity, mass transfer coefficient and drop in the COP, MRR and dehumidification efficiency with the increase in the flow airflow rate. On increasing the CaCl₂ concentration, dehumidification performance parameters such as MRR, COP and mass transfer coefficient are found to be increased. Out of the three different densities tested, 500 kg/m³ shows best performance with MRR, ΔRH and dehumidification effectiveness being 9.7%, 18.7% and 4.9% lower than the Celdek pad when measured at 5 m/s of air velocity for 30% desiccant concentration. Optimisation of the input parameters has been done and the results revealed that air velocity should be maintained within the range of 4–5 m/s to minimise energy consumption and optimum performance.