Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite

Murthy Brn; Rajendra Beedu

doi:10.24247/ijmperdfeb202025

Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite

Murthy Brn, Rajendra Beedu

Research output: Contribution to journal › Article › peer-review

Abstract

The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Carbon Basalt hybrid composite. The process parameters selected are Drill diameter (DD), Speed (N) and Feed (f). The output parameters are Thrust, Torque, Surface Roughness and Delamination. Three levels of each input parameters are considered. Taguchi’s L27 array is used to set the process parameters. Gray relational analysis (GRA) is used to find the optimum value of process parameters. Conduction of ANOVA on GRA shown the significance of each factor on the process output. A confirmation test conducted revealed that the setting of parameters ensures optimum output.

Original language	English
Article number	IJMPERDFEB202025
Pages (from-to)	295-304
Number of pages	10
Journal	International Journal of Mechanical and Production Engineering Research and Development
Volume	10
Issue number	1
DOIs	https://doi.org/10.24247/ijmperdfeb202025
Publication status	Published - 01-01-2020
Externally published	Yes

All Science Journal Classification (ASJC) codes

Aerospace Engineering
Mechanical Engineering
Fluid Flow and Transfer Processes

Access to Document

10.24247/ijmperdfeb202025

Cite this

@article{712d93b836b440ccae457ecaa5e0b84f,

title = "Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite",

abstract = "The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Carbon Basalt hybrid composite. The process parameters selected are Drill diameter (DD), Speed (N) and Feed (f). The output parameters are Thrust, Torque, Surface Roughness and Delamination. Three levels of each input parameters are considered. Taguchi{\textquoteright}s L27 array is used to set the process parameters. Gray relational analysis (GRA) is used to find the optimum value of process parameters. Conduction of ANOVA on GRA shown the significance of each factor on the process output. A confirmation test conducted revealed that the setting of parameters ensures optimum output.",

author = "Murthy Brn and Rajendra Beedu",

year = "2020",

month = jan,

day = "1",

doi = "10.24247/ijmperdfeb202025",

language = "English",

volume = "10",

pages = "295--304",

journal = "International Journal of Mechanical and Production Engineering Research and Development",

issn = "2249-6890",

publisher = "Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC)",

number = "1",

}

Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite. / Brn, Murthy; Beedu, Rajendra.

In: International Journal of Mechanical and Production Engineering Research and Development, Vol. 10, No. 1, IJMPERDFEB202025, 01.01.2020, p. 295-304.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite

AU - Brn, Murthy

AU - Beedu, Rajendra

PY - 2020/1/1

Y1 - 2020/1/1

N2 - The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Carbon Basalt hybrid composite. The process parameters selected are Drill diameter (DD), Speed (N) and Feed (f). The output parameters are Thrust, Torque, Surface Roughness and Delamination. Three levels of each input parameters are considered. Taguchi’s L27 array is used to set the process parameters. Gray relational analysis (GRA) is used to find the optimum value of process parameters. Conduction of ANOVA on GRA shown the significance of each factor on the process output. A confirmation test conducted revealed that the setting of parameters ensures optimum output.

AB - The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Carbon Basalt hybrid composite. The process parameters selected are Drill diameter (DD), Speed (N) and Feed (f). The output parameters are Thrust, Torque, Surface Roughness and Delamination. Three levels of each input parameters are considered. Taguchi’s L27 array is used to set the process parameters. Gray relational analysis (GRA) is used to find the optimum value of process parameters. Conduction of ANOVA on GRA shown the significance of each factor on the process output. A confirmation test conducted revealed that the setting of parameters ensures optimum output.

UR - http://www.scopus.com/inward/record.url?scp=85077889585&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85077889585&partnerID=8YFLogxK

U2 - 10.24247/ijmperdfeb202025

DO - 10.24247/ijmperdfeb202025

M3 - Article

AN - SCOPUS:85077889585

SN - 2249-6890

VL - 10

SP - 295

EP - 304

JO - International Journal of Mechanical and Production Engineering Research and Development

JF - International Journal of Mechanical and Production Engineering Research and Development

IS - 1

M1 - IJMPERDFEB202025

ER -

Application of grey relational analysis for multi response optimization of process parameters in drilling of carbon-basalt hybrid composite

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this