AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE

Anjaiah Devineni

doi:10.1109/ICMET.2010.5598481

AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE

Anjaiah Devineni^*

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

This paper discusses the use of Abrasive Water Suspension Jets (AWSJ) for the cutting of glass. The experimental investigation of the combined effect of process parameters on the depth of cut and kerf width produced by AWSJ has been carried out using Design of Experiments (DOE). DOE tools such as Orthogonal Array (OA) and Analysis of Variance (ANOVA) have been used to design the experiments and to analyze the experimental data respectively. ANOV A results indicate that the effect of pressure on depth of cut is maximum (50%) followed by abrasive size (22%) and feed (12%). Whereas the effect of standoff distance on kerf width is maximum (75%) followed by pressure (17%).

Original language	English
Title of host publication	ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings
Pages	15-19
Number of pages	5
DOIs	https://doi.org/10.1109/ICMET.2010.5598481
Publication status	Published - 29-11-2010
Externally published	Yes
Event	2010 International Conference on Mechanical and Electrical Technology, ICMET 2010 - Singapore, Singapore Duration: 10-09-2010 → 12-09-2010

Publication series

Name	ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings

Conference

Conference	2010 International Conference on Mechanical and Electrical Technology, ICMET 2010
Country/Territory	Singapore
City	Singapore
Period	10-09-10 → 12-09-10

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering
Mechanical Engineering

Access to Document

10.1109/ICMET.2010.5598481

Cite this

Devineni, A. (2010). AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE. In ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings (pp. 15-19). Article 5598481 (ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings). https://doi.org/10.1109/ICMET.2010.5598481

@inproceedings{646305bc7921410b852f6671a00bde05,

title = "AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE",

abstract = "This paper discusses the use of Abrasive Water Suspension Jets (AWSJ) for the cutting of glass. The experimental investigation of the combined effect of process parameters on the depth of cut and kerf width produced by AWSJ has been carried out using Design of Experiments (DOE). DOE tools such as Orthogonal Array (OA) and Analysis of Variance (ANOVA) have been used to design the experiments and to analyze the experimental data respectively. ANOV A results indicate that the effect of pressure on depth of cut is maximum (50\%) followed by abrasive size (22\%) and feed (12\%). Whereas the effect of standoff distance on kerf width is maximum (75\%) followed by pressure (17\%).",

author = "Anjaiah Devineni",

year = "2010",

month = nov,

day = "29",

doi = "10.1109/ICMET.2010.5598481",

language = "English",

isbn = "9781424481019",

series = "ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings",

pages = "15--19",

booktitle = "ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings",

note = "2010 International Conference on Mechanical and Electrical Technology, ICMET 2010 ; Conference date: 10-09-2010 Through 12-09-2010",

}

Devineni, A 2010, AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE. in ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings., 5598481, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings, pp. 15-19, 2010 International Conference on Mechanical and Electrical Technology, ICMET 2010, Singapore, Singapore, 10-09-10. https://doi.org/10.1109/ICMET.2010.5598481

AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE. / Devineni, Anjaiah.
ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. 2010. p. 15-19 5598481 (ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE

AU - Devineni, Anjaiah

PY - 2010/11/29

Y1 - 2010/11/29

N2 - This paper discusses the use of Abrasive Water Suspension Jets (AWSJ) for the cutting of glass. The experimental investigation of the combined effect of process parameters on the depth of cut and kerf width produced by AWSJ has been carried out using Design of Experiments (DOE). DOE tools such as Orthogonal Array (OA) and Analysis of Variance (ANOVA) have been used to design the experiments and to analyze the experimental data respectively. ANOV A results indicate that the effect of pressure on depth of cut is maximum (50%) followed by abrasive size (22%) and feed (12%). Whereas the effect of standoff distance on kerf width is maximum (75%) followed by pressure (17%).

AB - This paper discusses the use of Abrasive Water Suspension Jets (AWSJ) for the cutting of glass. The experimental investigation of the combined effect of process parameters on the depth of cut and kerf width produced by AWSJ has been carried out using Design of Experiments (DOE). DOE tools such as Orthogonal Array (OA) and Analysis of Variance (ANOVA) have been used to design the experiments and to analyze the experimental data respectively. ANOV A results indicate that the effect of pressure on depth of cut is maximum (50%) followed by abrasive size (22%) and feed (12%). Whereas the effect of standoff distance on kerf width is maximum (75%) followed by pressure (17%).

UR - https://www.scopus.com/pages/publications/78649248726

UR - https://www.scopus.com/pages/publications/78649248726#tab=citedBy

U2 - 10.1109/ICMET.2010.5598481

DO - 10.1109/ICMET.2010.5598481

M3 - Conference contribution

AN - SCOPUS:78649248726

SN - 9781424481019

T3 - ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings

SP - 15

EP - 19

BT - ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings

T2 - 2010 International Conference on Mechanical and Electrical Technology, ICMET 2010

Y2 - 10 September 2010 through 12 September 2010

ER -

Devineni A. AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE. In ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. 2010. p. 15-19. 5598481. (ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings). doi: 10.1109/ICMET.2010.5598481

AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this