BPPM optical WDM systems with error control coding techniques on BAC

H. S. Mruthyunjaya

doi:10.1080/00207210802354866

BPPM optical WDM systems with error control coding techniques on BAC

H. S. Mruthyunjaya

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

In a binary asymmetric channel (BAC) it may be necessary to correct only those errors that result from incorrect transmission of one of the two code elements. In optical fibre multichannel systems, the optical amplifiers are critical components and amplified spontaneous emission (ASE) noise in the optical amplifiers is the major source of noise in it. In this study, performance of single as well as concatenated error correcting codes in such systems in presence of stimulated Raman scattering and ASE noises (ASE, ASE-Signal beat and ASE-ASE beat) with asymmetric channel statistics with binary pulse position (BPPM) modulation scheme is reported. The error probability performances have been evaluated and compared between un-coded OOK, coded BAC with OOK and coded BPPM systems. The coded BPPM is found to be more efficient and has a better error rate than others.

Original language	English
Pages (from-to)	1093-1101
Number of pages	9
Journal	International Journal of Electronics
Volume	95
Issue number	10
DOIs	https://doi.org/10.1080/00207210802354866
Publication status	Published - 01-2008

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1080/00207210802354866

Cite this

@article{f429e2d2512345d7be2c92a1eece04e0,

title = "BPPM optical WDM systems with error control coding techniques on BAC",

abstract = "In a binary asymmetric channel (BAC) it may be necessary to correct only those errors that result from incorrect transmission of one of the two code elements. In optical fibre multichannel systems, the optical amplifiers are critical components and amplified spontaneous emission (ASE) noise in the optical amplifiers is the major source of noise in it. In this study, performance of single as well as concatenated error correcting codes in such systems in presence of stimulated Raman scattering and ASE noises (ASE, ASE-Signal beat and ASE-ASE beat) with asymmetric channel statistics with binary pulse position (BPPM) modulation scheme is reported. The error probability performances have been evaluated and compared between un-coded OOK, coded BAC with OOK and coded BPPM systems. The coded BPPM is found to be more efficient and has a better error rate than others.",

author = "Mruthyunjaya, {H. S.}",

year = "2008",

month = jan,

doi = "10.1080/00207210802354866",

language = "English",

volume = "95",

pages = "1093--1101",

journal = "International Journal of Electronics",

issn = "0020-7217",

publisher = "Taylor and Francis Ltd.",

number = "10",

}

TY - JOUR

T1 - BPPM optical WDM systems with error control coding techniques on BAC

AU - Mruthyunjaya, H. S.

PY - 2008/1

Y1 - 2008/1

N2 - In a binary asymmetric channel (BAC) it may be necessary to correct only those errors that result from incorrect transmission of one of the two code elements. In optical fibre multichannel systems, the optical amplifiers are critical components and amplified spontaneous emission (ASE) noise in the optical amplifiers is the major source of noise in it. In this study, performance of single as well as concatenated error correcting codes in such systems in presence of stimulated Raman scattering and ASE noises (ASE, ASE-Signal beat and ASE-ASE beat) with asymmetric channel statistics with binary pulse position (BPPM) modulation scheme is reported. The error probability performances have been evaluated and compared between un-coded OOK, coded BAC with OOK and coded BPPM systems. The coded BPPM is found to be more efficient and has a better error rate than others.

AB - In a binary asymmetric channel (BAC) it may be necessary to correct only those errors that result from incorrect transmission of one of the two code elements. In optical fibre multichannel systems, the optical amplifiers are critical components and amplified spontaneous emission (ASE) noise in the optical amplifiers is the major source of noise in it. In this study, performance of single as well as concatenated error correcting codes in such systems in presence of stimulated Raman scattering and ASE noises (ASE, ASE-Signal beat and ASE-ASE beat) with asymmetric channel statistics with binary pulse position (BPPM) modulation scheme is reported. The error probability performances have been evaluated and compared between un-coded OOK, coded BAC with OOK and coded BPPM systems. The coded BPPM is found to be more efficient and has a better error rate than others.

UR - http://www.scopus.com/inward/record.url?scp=54049156898&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=54049156898&partnerID=8YFLogxK

U2 - 10.1080/00207210802354866

DO - 10.1080/00207210802354866

M3 - Article

AN - SCOPUS:54049156898

SN - 0020-7217

VL - 95

SP - 1093

EP - 1101

JO - International Journal of Electronics

JF - International Journal of Electronics

IS - 10

ER -

BPPM optical WDM systems with error control coding techniques on BAC

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this