3 Citations (Scopus)


EN18 steel and copper are used as materials for oil and gas industries for chemical storage, which come in contact with the sulfuric acid medium during the pickling process. In such instances cleaning of impurities and oxide layer removal, leads to excessive corrosion. Thus, the improvement in the microstructure through annealing treatment and its effect on the corrosion behavior of EN18 steel and copper are studied by immersing in 0.5 M H2SO4 for as-bought and 0.5, 0.25, 0.1 M H2SO4 medium solutions after annealing treatment. The metal specimens were heated to 900 °C for EN18 steel and 600 °C for copper and then both were furnace cooled and the change in the microstructure of annealed and as-received metal specimens was analyzed using Scanning Electron microscopy (SEM). The Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic polarization (PDP) measurement showed that there is a decrease in the corrosion rate for both metals after annealing treatment. The effect of corrosion rate at the temperature range of 30-50 °C was analyzed and activation parameters were described using Arrhenius and transition state theories. Suitable corrosion mechanisms for both steel and copper in the H2SO4 medium have been discussed.

Original languageEnglish
Pages (from-to)8247-8261
Number of pages15
JournalJournal of Materials Engineering and Performance
Issue number18
Publication statusAccepted/In press - 2022

All Science Journal Classification (ASJC) codes

  • General Materials Science
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'Corrosion Behavior of EN18 Steel and Copper in the Sulfuric Acid Medium for As-Bought and Annealed Materials'. Together they form a unique fingerprint.

Cite this