Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

J. Lokesh; Akshat Khemka; Poorvi Sharma

doi:10.1007/978-981-10-4762-6_23

Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

J. Lokesh^*
, Akshat Khemka
, Poorvi Sharma

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

Original language	English
Title of host publication	Advances in Systems, Control and Automation - ETAEERE-2016
Editors	Avinash Konkani, Rabindranath Bera, Samrat Paul
Publisher	Springer Verlag
Pages	251-257
Number of pages	7
ISBN (Print)	9789811047619
DOIs	https://doi.org/10.1007/978-981-10-4762-6_23
Publication status	Published - 01-01-2018
Event	International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016 - Majhitar, India Duration: 17-12-2016 → 18-12-2016

Publication series

Name	Lecture Notes in Electrical Engineering
Volume	442
ISSN (Print)	1876-1100
ISSN (Electronic)	1876-1119

Conference

Conference	International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016
Country/Territory	India
City	Majhitar
Period	17-12-16 → 18-12-16

All Science Journal Classification (ASJC) codes

Industrial and Manufacturing Engineering

Access to Document

10.1007/978-981-10-4762-6_23

Cite this

Lokesh, J., Khemka, A., & Sharma, P. (2018). Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. In A. Konkani, R. Bera, & S. Paul (Eds.), Advances in Systems, Control and Automation - ETAEERE-2016 (pp. 251-257). (Lecture Notes in Electrical Engineering; Vol. 442). Springer Verlag. https://doi.org/10.1007/978-981-10-4762-6_23

@inproceedings{95ae1337dfab4c1085b0ca5aab4889e9,

title = "Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp",

abstract = "Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.",

author = "J. Lokesh and Akshat Khemka and Poorvi Sharma",

note = "Publisher Copyright: {\textcopyright} 2018, Springer Nature Singapore Pte Ltd.; International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016 ; Conference date: 17-12-2016 Through 18-12-2016",

year = "2018",

month = jan,

day = "1",

doi = "10.1007/978-981-10-4762-6\_23",

language = "English",

isbn = "9789811047619",

series = "Lecture Notes in Electrical Engineering",

publisher = "Springer Verlag",

pages = "251--257",

editor = "Avinash Konkani and Rabindranath Bera and Samrat Paul",

booktitle = "Advances in Systems, Control and Automation - ETAEERE-2016",

address = "Germany",

}

Lokesh, J, Khemka, A & Sharma, P 2018, Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. in A Konkani, R Bera & S Paul (eds), Advances in Systems, Control and Automation - ETAEERE-2016. Lecture Notes in Electrical Engineering, vol. 442, Springer Verlag, pp. 251-257, International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016, Majhitar, India, 17-12-16. https://doi.org/10.1007/978-981-10-4762-6_23

Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. / Lokesh, J.; Khemka, Akshat; Sharma, Poorvi.
Advances in Systems, Control and Automation - ETAEERE-2016. ed. / Avinash Konkani; Rabindranath Bera; Samrat Paul. Springer Verlag, 2018. p. 251-257 (Lecture Notes in Electrical Engineering; Vol. 442).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

AU - Lokesh, J.

AU - Khemka, Akshat

AU - Sharma, Poorvi

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

AB - Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

UR - https://www.scopus.com/pages/publications/85040001008

UR - https://www.scopus.com/pages/publications/85040001008#tab=citedBy

U2 - 10.1007/978-981-10-4762-6_23

DO - 10.1007/978-981-10-4762-6_23

M3 - Conference contribution

AN - SCOPUS:85040001008

SN - 9789811047619

T3 - Lecture Notes in Electrical Engineering

SP - 251

EP - 257

BT - Advances in Systems, Control and Automation - ETAEERE-2016

A2 - Konkani, Avinash

A2 - Bera, Rabindranath

A2 - Paul, Samrat

PB - Springer Verlag

T2 - International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016

Y2 - 17 December 2016 through 18 December 2016

ER -

Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this