Experimental study on machining of AA7075 using Taguchi method

Anil Sequeiera; D. Deepak; H. K. Sachidananda

doi:10.1007/s42452-022-05249-9

Experimental study on machining of AA7075 using Taguchi method

Anil Sequeiera, D. Deepak, H. K. Sachidananda^*

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

The machining parameter during milling process plays a very important role in the machining process of various materials. In this study the various parameters such as feed, speed of the spindle, depth of cut has been studied considering AA7075 aluminum material and its effect on surface roughness of the workpiece have been studied. These types of material are commonly used in aerospace, defense, marine and automotive industries due to its high strength to weight ratio. The optimization of these parameters has been done considering Grey-Taguchi method. From this study it can be concluded that good surface finish can be achieved during machining of AA7075 by controlling the various parameters. From the results it can be concluded that the cutting speed, feed is significant as compared to depth of cut.

Original language	English
Article number	11
Journal	SN Applied Sciences
Volume	5
Issue number	1
DOIs	https://doi.org/10.1007/s42452-022-05249-9
Publication status	Published - 01-2023

All Science Journal Classification (ASJC) codes

General Chemical Engineering
General Materials Science
General Environmental Science
General Engineering
General Physics and Astronomy
General Earth and Planetary Sciences

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1007/s42452-022-05249-9

Cite this

@article{de36fec7ae3f4fbca51d7cbef424bf19,

title = "Experimental study on machining of AA7075 using Taguchi method",

abstract = "The machining parameter during milling process plays a very important role in the machining process of various materials. In this study the various parameters such as feed, speed of the spindle, depth of cut has been studied considering AA7075 aluminum material and its effect on surface roughness of the workpiece have been studied. These types of material are commonly used in aerospace, defense, marine and automotive industries due to its high strength to weight ratio. The optimization of these parameters has been done considering Grey-Taguchi method. From this study it can be concluded that good surface finish can be achieved during machining of AA7075 by controlling the various parameters. From the results it can be concluded that the cutting speed, feed is significant as compared to depth of cut.",

author = "Anil Sequeiera and D. Deepak and Sachidananda, {H. K.}",

note = "Funding Information: The authors acknowledge the support provided by Devanand S during the preparation of the Research paper. Publisher Copyright: {\textcopyright} 2022, The Author(s).",

year = "2023",

month = jan,

doi = "10.1007/s42452-022-05249-9",

language = "English",

volume = "5",

journal = "SN Applied Sciences",

issn = "2523-3971",

publisher = "Springer Nature",

number = "1",

}

TY - JOUR

T1 - Experimental study on machining of AA7075 using Taguchi method

AU - Sequeiera, Anil

AU - Deepak, D.

AU - Sachidananda, H. K.

PY - 2023/1

Y1 - 2023/1

N2 - The machining parameter during milling process plays a very important role in the machining process of various materials. In this study the various parameters such as feed, speed of the spindle, depth of cut has been studied considering AA7075 aluminum material and its effect on surface roughness of the workpiece have been studied. These types of material are commonly used in aerospace, defense, marine and automotive industries due to its high strength to weight ratio. The optimization of these parameters has been done considering Grey-Taguchi method. From this study it can be concluded that good surface finish can be achieved during machining of AA7075 by controlling the various parameters. From the results it can be concluded that the cutting speed, feed is significant as compared to depth of cut.

AB - The machining parameter during milling process plays a very important role in the machining process of various materials. In this study the various parameters such as feed, speed of the spindle, depth of cut has been studied considering AA7075 aluminum material and its effect on surface roughness of the workpiece have been studied. These types of material are commonly used in aerospace, defense, marine and automotive industries due to its high strength to weight ratio. The optimization of these parameters has been done considering Grey-Taguchi method. From this study it can be concluded that good surface finish can be achieved during machining of AA7075 by controlling the various parameters. From the results it can be concluded that the cutting speed, feed is significant as compared to depth of cut.

UR - http://www.scopus.com/inward/record.url?scp=85143607471&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85143607471&partnerID=8YFLogxK

U2 - 10.1007/s42452-022-05249-9

DO - 10.1007/s42452-022-05249-9

M3 - Article

AN - SCOPUS:85143607471

SN - 2523-3971

VL - 5

JO - SN Applied Sciences

JF - SN Applied Sciences

IS - 1

M1 - 11

ER -

Experimental study on machining of AA7075 using Taguchi method

Abstract

All Science Journal Classification (ASJC) codes

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this