Hardness evaluation of as-cast and heat treated al based hybrid composites

Mallikarjun; M. Sreenivasa Reddy; Biradar Mallikarjun; N. G S Udupa

doi:10.1049/cp.2013.2534

Hardness evaluation of as-cast and heat treated al based hybrid composites

Mallikarjun
, M. Sreenivasa Reddy
, Biradar Mallikarjun
, N. G S Udupa

Department of Pharmaceutics, Manipal College of Pharmaceutical Sciences, Manipal

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Hybrid composite Materials have extensive engineering application where strength to weight ratio, low cost and ease of fabrication are required. The present investigation is focused on formation of a hybrid composite by using industrial waste fly ash and E glass short fibers by dispersing them into AA7010 alloy by Stir casting method. The MMC is obtained for the different compositions of Eglass and Fly ash particulates. After that the specimens are machined according to the standards and spcimens are subjected to heat treatment. The hardness test was conducted. The results are plotted and it is concluded that the addition of reinforcements and heat treatment increases in hardness of the composite material formed.

Original language	English
Title of host publication	National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013
Publisher	Institution of Engineering and Technology
Volume	2013
Edition	648 CP
ISBN (Print)	9781849198684
DOIs	https://doi.org/10.1049/cp.2013.2534
Publication status	Published - 2013

Publication series

Name	IET Conference Publications
Number	648 CP
Volume	2013

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1049/cp.2013.2534

Cite this

Mallikarjun, Reddy, M. S., Mallikarjun, B., & Udupa, N. G. S. (2013). Hardness evaluation of as-cast and heat treated al based hybrid composites. In National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013 (648 CP ed., Vol. 2013). (IET Conference Publications; Vol. 2013, No. 648 CP). Institution of Engineering and Technology. https://doi.org/10.1049/cp.2013.2534

@inproceedings{0acdf2471197475dbb49dde373a5604a,

title = "Hardness evaluation of as-cast and heat treated al based hybrid composites",

abstract = "Hybrid composite Materials have extensive engineering application where strength to weight ratio, low cost and ease of fabrication are required. The present investigation is focused on formation of a hybrid composite by using industrial waste fly ash and E glass short fibers by dispersing them into AA7010 alloy by Stir casting method. The MMC is obtained for the different compositions of Eglass and Fly ash particulates. After that the specimens are machined according to the standards and spcimens are subjected to heat treatment. The hardness test was conducted. The results are plotted and it is concluded that the addition of reinforcements and heat treatment increases in hardness of the composite material formed.",

author = "Mallikarjun and Reddy, \{M. Sreenivasa\} and Biradar Mallikarjun and Udupa, \{N. G S\}",

year = "2013",

doi = "10.1049/cp.2013.2534",

language = "English",

isbn = "9781849198684",

volume = "2013",

series = "IET Conference Publications",

publisher = "Institution of Engineering and Technology",

number = "648 CP",

booktitle = "National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013",

address = "United Kingdom",

edition = "648 CP",

}

Mallikarjun, Reddy, MS, Mallikarjun, B & Udupa, NGS 2013, Hardness evaluation of as-cast and heat treated al based hybrid composites. in National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013. 648 CP edn, vol. 2013, IET Conference Publications, no. 648 CP, vol. 2013, Institution of Engineering and Technology. https://doi.org/10.1049/cp.2013.2534

Hardness evaluation of as-cast and heat treated al based hybrid composites. / Mallikarjun; Reddy, M. Sreenivasa; Mallikarjun, Biradar et al.
National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013. Vol. 2013 648 CP. ed. Institution of Engineering and Technology, 2013. (IET Conference Publications; Vol. 2013, No. 648 CP).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Hardness evaluation of as-cast and heat treated al based hybrid composites

AU - Mallikarjun,

AU - Reddy, M. Sreenivasa

AU - Mallikarjun, Biradar

AU - Udupa, N. G S

PY - 2013

Y1 - 2013

N2 - Hybrid composite Materials have extensive engineering application where strength to weight ratio, low cost and ease of fabrication are required. The present investigation is focused on formation of a hybrid composite by using industrial waste fly ash and E glass short fibers by dispersing them into AA7010 alloy by Stir casting method. The MMC is obtained for the different compositions of Eglass and Fly ash particulates. After that the specimens are machined according to the standards and spcimens are subjected to heat treatment. The hardness test was conducted. The results are plotted and it is concluded that the addition of reinforcements and heat treatment increases in hardness of the composite material formed.

AB - Hybrid composite Materials have extensive engineering application where strength to weight ratio, low cost and ease of fabrication are required. The present investigation is focused on formation of a hybrid composite by using industrial waste fly ash and E glass short fibers by dispersing them into AA7010 alloy by Stir casting method. The MMC is obtained for the different compositions of Eglass and Fly ash particulates. After that the specimens are machined according to the standards and spcimens are subjected to heat treatment. The hardness test was conducted. The results are plotted and it is concluded that the addition of reinforcements and heat treatment increases in hardness of the composite material formed.

UR - https://www.scopus.com/pages/publications/84903554903

UR - https://www.scopus.com/pages/publications/84903554903#tab=citedBy

U2 - 10.1049/cp.2013.2534

DO - 10.1049/cp.2013.2534

M3 - Conference contribution

AN - SCOPUS:84903554903

SN - 9781849198684

VL - 2013

T3 - IET Conference Publications

BT - National Conference on Challenges in Research and Technology in the Coming Decades, CRT 2013

PB - Institution of Engineering and Technology

ER -

Hardness evaluation of as-cast and heat treated al based hybrid composites

Abstract

Publication series

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this