Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline

B. S. Nuthan Prasad*, Jayashish Kumar Pandey, G. N. Kumar

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

84 Citations (Scopus)

Abstract

In the present investigation, experiments were conducted in wide open throttle condition (WOT) for different speed ranging from 1200 rpm to 1800 rpm at an interval of 200 on a single-cylinder four-stroke variable compression ratio (VCR) SI engine. The engine fueled with equi-volume blend of methanol/gasoline fuel, while 14° BTDC ignition timing is maintained for all three different compression ratios (8, 9 & 10). Increasing the compression ratio from CR8 to CR10 for the methanol/gasoline blend has improved combustion efficiency by increasing the peak pressure and net heat release value by 27.5% and 30% respectively at a speed of 1600 rpm. The performance results show a good agreement of improvisation of 25% increase in BTE, and BSFC reduction by 19% at compression ratio 10:1. At higher compression ratio 10:1, there was a significant decrease observed in CO and HC by 30–40%, and the same trend is observed at all speeds; however, NOx emission increased with the increasing CR.

Original languageEnglish
Article number116605
JournalEnergy
Volume191
DOIs
Publication statusPublished - 15-01-2020

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline'. Together they form a unique fingerprint.

Cite this