TY - JOUR
T1 - Influence of machine variables on the microstructure and mechanical properties of AA6061/TiO2 friction stir welds
AU - Prabhu, Subramanya R.
AU - Shettigar, Arun
AU - Herbert, Mervin A.
AU - Rao, Shrikantha S.
N1 - Publisher Copyright:
© 2022 Informa UK Limited, trading as Taylor & Francis Group.
PY - 2022
Y1 - 2022
N2 - The present work explicates the joining of TiO2 (rutile) particles reinforced aluminium matrix composites (AMCs) through the friction stir welding (FSW) technique. Joining of AMCs using conventional fusion welding techniques faces a lot of challenges, which can be overcome by the FSW process. The effect of the two most critical process variables, welding speed, and tool rotational speed on the grain structure of the joint and on the mechanical behaviours was evaluated. The study revealed that machine variables regulate the quantity of heat input, heat exposure duration, and rate of cooling, thereby, significantly altering the grain size in the weld region and mechanical behaviour of the joint. The tool rotational speed had a substantial impact on the joint strength, whereas tool traverse speed facilitates homogeneous dispersion of reinforced particles in the matrix. The ‘W’-shaped hardness variation profile was observed across the weld zone, showing the highest hardness in the weld stir zone. The UTS of the welded specimen, measured across the joint was almost equal to the parent material with fracture occurring at the interface of the heat-affected and the thermo-mechanically affected zone which was the weakest point in the weld region.
AB - The present work explicates the joining of TiO2 (rutile) particles reinforced aluminium matrix composites (AMCs) through the friction stir welding (FSW) technique. Joining of AMCs using conventional fusion welding techniques faces a lot of challenges, which can be overcome by the FSW process. The effect of the two most critical process variables, welding speed, and tool rotational speed on the grain structure of the joint and on the mechanical behaviours was evaluated. The study revealed that machine variables regulate the quantity of heat input, heat exposure duration, and rate of cooling, thereby, significantly altering the grain size in the weld region and mechanical behaviour of the joint. The tool rotational speed had a substantial impact on the joint strength, whereas tool traverse speed facilitates homogeneous dispersion of reinforced particles in the matrix. The ‘W’-shaped hardness variation profile was observed across the weld zone, showing the highest hardness in the weld stir zone. The UTS of the welded specimen, measured across the joint was almost equal to the parent material with fracture occurring at the interface of the heat-affected and the thermo-mechanically affected zone which was the weakest point in the weld region.
UR - http://www.scopus.com/inward/record.url?scp=85133424368&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85133424368&partnerID=8YFLogxK
U2 - 10.1080/2374068X.2022.2094072
DO - 10.1080/2374068X.2022.2094072
M3 - Article
AN - SCOPUS:85133424368
SN - 2374-068X
VL - 9
SP - 441
EP - 456
JO - Advances in Materials and Processing Technologies
JF - Advances in Materials and Processing Technologies
IS - 2
ER -