LabVIEW implementation of fuzzy logic controller for heat exchanger process

Rajarshi Paul; C. Shreesha; Sumit Shinde

doi:10.1109/ABLAZE.2015.7154959

LabVIEW implementation of fuzzy logic controller for heat exchanger process

Rajarshi Paul, C. Shreesha, Sumit Shinde

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Abstract

This paper investigates the implementation of fuzzy logic controller for shell and tube heat exchanger (STHE) using LabVIEW. The front panel in LabVIEW program displays the shell and tube heat exchanger process control as a graphical model and the logical part was designed in the block diagram section. The model consists of two modes, in automatic mode the controller tracks the set point on the predefined values but in the manual mode the user needs to define the desired range of temperature where also the controller acts prominently. The fuzzy controller design is based on linguistic rules implementation as the control strategy. The Fuzzy logic controller of the LabVIEW was designed with the logic to maintain constant temperature from the outlet of the heat exchanger. The simulation results obtained are compared with the conventional controller and the performance comparisons are outlined in this paper.

Original language	English
Title of host publication	2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	13-17
Number of pages	5
ISBN (Electronic)	9781479984336
DOIs	https://doi.org/10.1109/ABLAZE.2015.7154959
Publication status	Published - 01-01-2015
Event	2015 1st International Conference On Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015 - Greater Noida, India Duration: 25-02-2015 → 27-02-2015

Conference

Conference	2015 1st International Conference On Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015
Country/Territory	India
City	Greater Noida
Period	25-02-15 → 27-02-15

All Science Journal Classification (ASJC) codes

Computer Networks and Communications
Information Systems
Signal Processing
Computational Theory and Mathematics

Access to Document

10.1109/ABLAZE.2015.7154959

Cite this

@inproceedings{c26d6079fb8d4ecea6107d642cf6f883,

title = "LabVIEW implementation of fuzzy logic controller for heat exchanger process",

abstract = "This paper investigates the implementation of fuzzy logic controller for shell and tube heat exchanger (STHE) using LabVIEW. The front panel in LabVIEW program displays the shell and tube heat exchanger process control as a graphical model and the logical part was designed in the block diagram section. The model consists of two modes, in automatic mode the controller tracks the set point on the predefined values but in the manual mode the user needs to define the desired range of temperature where also the controller acts prominently. The fuzzy controller design is based on linguistic rules implementation as the control strategy. The Fuzzy logic controller of the LabVIEW was designed with the logic to maintain constant temperature from the outlet of the heat exchanger. The simulation results obtained are compared with the conventional controller and the performance comparisons are outlined in this paper.",

author = "Rajarshi Paul and C. Shreesha and Sumit Shinde",

year = "2015",

month = jan,

day = "1",

doi = "10.1109/ABLAZE.2015.7154959",

language = "English",

pages = "13--17",

booktitle = "2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "2015 1st International Conference On Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015 ; Conference date: 25-02-2015 Through 27-02-2015",

}

Paul, R, Shreesha, C & Shinde, S 2015, LabVIEW implementation of fuzzy logic controller for heat exchanger process. in 2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015., 7154959, Institute of Electrical and Electronics Engineers Inc., pp. 13-17, 2015 1st International Conference On Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015, Greater Noida, India, 25-02-15. https://doi.org/10.1109/ABLAZE.2015.7154959

LabVIEW implementation of fuzzy logic controller for heat exchanger process. / Paul, Rajarshi; Shreesha, C.; Shinde, Sumit.
2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. p. 13-17 7154959.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - LabVIEW implementation of fuzzy logic controller for heat exchanger process

AU - Paul, Rajarshi

AU - Shreesha, C.

AU - Shinde, Sumit

PY - 2015/1/1

Y1 - 2015/1/1

N2 - This paper investigates the implementation of fuzzy logic controller for shell and tube heat exchanger (STHE) using LabVIEW. The front panel in LabVIEW program displays the shell and tube heat exchanger process control as a graphical model and the logical part was designed in the block diagram section. The model consists of two modes, in automatic mode the controller tracks the set point on the predefined values but in the manual mode the user needs to define the desired range of temperature where also the controller acts prominently. The fuzzy controller design is based on linguistic rules implementation as the control strategy. The Fuzzy logic controller of the LabVIEW was designed with the logic to maintain constant temperature from the outlet of the heat exchanger. The simulation results obtained are compared with the conventional controller and the performance comparisons are outlined in this paper.

AB - This paper investigates the implementation of fuzzy logic controller for shell and tube heat exchanger (STHE) using LabVIEW. The front panel in LabVIEW program displays the shell and tube heat exchanger process control as a graphical model and the logical part was designed in the block diagram section. The model consists of two modes, in automatic mode the controller tracks the set point on the predefined values but in the manual mode the user needs to define the desired range of temperature where also the controller acts prominently. The fuzzy controller design is based on linguistic rules implementation as the control strategy. The Fuzzy logic controller of the LabVIEW was designed with the logic to maintain constant temperature from the outlet of the heat exchanger. The simulation results obtained are compared with the conventional controller and the performance comparisons are outlined in this paper.

UR - http://www.scopus.com/inward/record.url?scp=84941196522&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84941196522&partnerID=8YFLogxK

U2 - 10.1109/ABLAZE.2015.7154959

DO - 10.1109/ABLAZE.2015.7154959

M3 - Conference contribution

AN - SCOPUS:84941196522

SP - 13

EP - 17

BT - 2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2015 1st International Conference On Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015

Y2 - 25 February 2015 through 27 February 2015

ER -

LabVIEW implementation of fuzzy logic controller for heat exchanger process

Abstract

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this