Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column

I. Thirunavukkarasu; R. Janani; Eadala Sarath Yadav; Shanmuga Priya Selvanathan

doi:10.1109/ICACTM.2019.8776844

Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column

I. Thirunavukkarasu
, R. Janani
, Eadala Sarath Yadav
, Shanmuga Priya Selvanathan

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Abstract

In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.

Original language	English
Title of host publication	2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	450-454
Number of pages	5
ISBN (Electronic)	9781538680100
DOIs	https://doi.org/10.1109/ICACTM.2019.8776844
Publication status	Published - 01-04-2019
Event	2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019 - London, United Kingdom Duration: 24-04-2019 → 26-04-2019

Publication series

Name	2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019

Conference

Conference	2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019
Country/Territory	United Kingdom
City	London
Period	24-04-19 → 26-04-19

All Science Journal Classification (ASJC) codes

Strategy and Management
Artificial Intelligence
Management of Technology and Innovation
Computer Science Applications
Information Systems and Management
Control and Optimization
Instrumentation

Access to Document

10.1109/ICACTM.2019.8776844

Cite this

Thirunavukkarasu, I., Janani, R., Yadav, E. S., & Priya Selvanathan, S. (2019). Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column. In 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019 (pp. 450-454). Article 8776844 (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICACTM.2019.8776844

Thirunavukkarasu, I. ; Janani, R. ; Yadav, Eadala Sarath et al. / Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column. 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 450-454 (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019).

@inproceedings{14988259a9cb4b1ca6723a90d2b13728,

title = "Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column",

abstract = "In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.",

author = "I. Thirunavukkarasu and R. Janani and Yadav, \{Eadala Sarath\} and \{Priya Selvanathan\}, Shanmuga",

year = "2019",

month = apr,

day = "1",

doi = "10.1109/ICACTM.2019.8776844",

language = "English",

series = "2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "450--454",

booktitle = "2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019",

address = "United States",

note = "2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019 ; Conference date: 24-04-2019 Through 26-04-2019",

}

Thirunavukkarasu, I, Janani, R, Yadav, ES & Priya Selvanathan, S 2019, Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column. in 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019., 8776844, 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019, Institute of Electrical and Electronics Engineers Inc., pp. 450-454, 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019, London, United Kingdom, 24-04-19. https://doi.org/10.1109/ICACTM.2019.8776844

Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column. / Thirunavukkarasu, I.; Janani, R.; Yadav, Eadala Sarath et al.
2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019. Institute of Electrical and Electronics Engineers Inc., 2019. p. 450-454 8776844 (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column

AU - Thirunavukkarasu, I.

AU - Janani, R.

AU - Yadav, Eadala Sarath

AU - Priya Selvanathan, Shanmuga

PY - 2019/4/1

Y1 - 2019/4/1

N2 - In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.

AB - In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.

UR - https://www.scopus.com/pages/publications/85070597200

UR - https://www.scopus.com/pages/publications/85070597200#tab=citedBy

U2 - 10.1109/ICACTM.2019.8776844

DO - 10.1109/ICACTM.2019.8776844

M3 - Conference contribution

T3 - 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019

SP - 450

EP - 454

BT - 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019

Y2 - 24 April 2019 through 26 April 2019

ER -

Thirunavukkarasu I, Janani R, Yadav ES, Priya Selvanathan S. Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column. In 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 450-454. 8776844. (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019). doi: 10.1109/ICACTM.2019.8776844

Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this