Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application

Mandeep Singh; Sanjeev Kumar Raghuwanshi; Om Prakash

doi:10.1109/JSEN.2019.2897616

Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application

Mandeep Singh^*
, Sanjeev Kumar Raghuwanshi
, Om Prakash

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

28 Citations (Scopus)

Abstract

A dual-band stop vertical hybrid plasmonic filter based on the silicon nitride fin Bragg grating (FBG) is designed and simulated in the infra-red band. It consists of the two silicon nitride FBGs embedded in the silicon waveguide separated by L _SP spacing. Finite element method-based 3D-COMSOL simulation shows two stop band wavelengths at 1.462 and 1.515 μm, respectively. Furthermore, its on-chip methane gas sensing application for coal mines is also investigated. The proposed filter-cum-sensor is the complementary metal-oxide-semiconductor compatible demonstrating 856.50-nm/RIU sensitivity, 120-RIU ^-1 figure of merit, 6.34 × 10 ^-2 RIU limit of detection, and 0.52-nm/K temperature sensitivity.

Original language	English
Article number	8635558
Pages (from-to)	4039-4044
Number of pages	6
Journal	IEEE Sensors Journal
Volume	19
Issue number	11
DOIs	https://doi.org/10.1109/JSEN.2019.2897616
Publication status	Published - 01-06-2019

All Science Journal Classification (ASJC) codes

Instrumentation
Electrical and Electronic Engineering

Access to Document

10.1109/JSEN.2019.2897616

Cite this

@article{78ccda7023a14e1fa6f5c7a1fcb9eee0,

title = "Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application",

abstract = " A dual-band stop vertical hybrid plasmonic filter based on the silicon nitride fin Bragg grating (FBG) is designed and simulated in the infra-red band. It consists of the two silicon nitride FBGs embedded in the silicon waveguide separated by L SP spacing. Finite element method-based 3D-COMSOL simulation shows two stop band wavelengths at 1.462 and 1.515 μm, respectively. Furthermore, its on-chip methane gas sensing application for coal mines is also investigated. The proposed filter-cum-sensor is the complementary metal-oxide-semiconductor compatible demonstrating 856.50-nm/RIU sensitivity, 120-RIU -1 figure of merit, 6.34 × 10 -2 RIU limit of detection, and 0.52-nm/K temperature sensitivity. ",

author = "Mandeep Singh and Raghuwanshi, \{Sanjeev Kumar\} and Om Prakash",

note = "Publisher Copyright: {\textcopyright} 2001-2012 IEEE.",

year = "2019",

month = jun,

day = "1",

doi = "10.1109/JSEN.2019.2897616",

language = "English",

volume = "19",

pages = "4039--4044",

journal = "IEEE Sensors Journal",

issn = "1530-437X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "11",

}

TY - JOUR

T1 - Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application

AU - Singh, Mandeep

AU - Raghuwanshi, Sanjeev Kumar

AU - Prakash, Om

PY - 2019/6/1

Y1 - 2019/6/1

N2 - A dual-band stop vertical hybrid plasmonic filter based on the silicon nitride fin Bragg grating (FBG) is designed and simulated in the infra-red band. It consists of the two silicon nitride FBGs embedded in the silicon waveguide separated by L SP spacing. Finite element method-based 3D-COMSOL simulation shows two stop band wavelengths at 1.462 and 1.515 μm, respectively. Furthermore, its on-chip methane gas sensing application for coal mines is also investigated. The proposed filter-cum-sensor is the complementary metal-oxide-semiconductor compatible demonstrating 856.50-nm/RIU sensitivity, 120-RIU -1 figure of merit, 6.34 × 10 -2 RIU limit of detection, and 0.52-nm/K temperature sensitivity.

AB - A dual-band stop vertical hybrid plasmonic filter based on the silicon nitride fin Bragg grating (FBG) is designed and simulated in the infra-red band. It consists of the two silicon nitride FBGs embedded in the silicon waveguide separated by L SP spacing. Finite element method-based 3D-COMSOL simulation shows two stop band wavelengths at 1.462 and 1.515 μm, respectively. Furthermore, its on-chip methane gas sensing application for coal mines is also investigated. The proposed filter-cum-sensor is the complementary metal-oxide-semiconductor compatible demonstrating 856.50-nm/RIU sensitivity, 120-RIU -1 figure of merit, 6.34 × 10 -2 RIU limit of detection, and 0.52-nm/K temperature sensitivity.

UR - https://www.scopus.com/pages/publications/85065416719

UR - https://www.scopus.com/pages/publications/85065416719#tab=citedBy

U2 - 10.1109/JSEN.2019.2897616

DO - 10.1109/JSEN.2019.2897616

M3 - Article

AN - SCOPUS:85065416719

SN - 1530-437X

VL - 19

SP - 4039

EP - 4044

JO - IEEE Sensors Journal

JF - IEEE Sensors Journal

IS - 11

M1 - 8635558

ER -

Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this