Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

P. K. Jayashree; S. S. Sharma; Raviraj Shetty; Ashish Mahato; M. C. Gowrishankar

doi:10.1016/j.matpr.2018.10.154

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

P. K. Jayashree, S. S. Sharma, Raviraj Shetty, Ashish Mahato, M. C. Gowrishankar

Department of Mechanical & Industrial Engineering Manipal Institute of Technology, Manipal

Research output: Contribution to journal › Conference article › peer-review

10 Citations (Scopus)

Abstract

Aluminium in pure form has comparably less strength, though some of its alloys are stronger than structural steels. 6061Al alloy is so strong and hence used in aggressive conditions like aerospace applications. Possessing these superior properties, the defects like porosity, hot cracking and stress corrosion cracking during welding of aluminium alloy is yet to be optimized. This paper focus to determine the favourable welding conditions for Tungsten Inert Gas (TIG) welding of 6061Al alloy based on Taguchi's design of experiments. Hence the concentration is on experimentally identifying the effect of the different welding parameters on hardness and weld bead geometry at weld zone under different welding condition obtained by L₉ Orthogonal array using Taguchi's design of experiments.

Original language	English
Pages (from-to)	23648-23655
Number of pages	8
Journal	Materials Today: Proceedings
Volume	5
Issue number	11
DOIs	https://doi.org/10.1016/j.matpr.2018.10.154
Publication status	Published - 01-01-2018
Event	2017 International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2017 - Bengaluru, India Duration: 17-08-2017 → 19-08-2017

All Science Journal Classification (ASJC) codes

Materials Science(all)

Access to Document

10.1016/j.matpr.2018.10.154

Cite this

@article{56ec8a592685442ea343afa32c6a78ba,

title = "Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments",

abstract = "Aluminium in pure form has comparably less strength, though some of its alloys are stronger than structural steels. 6061Al alloy is so strong and hence used in aggressive conditions like aerospace applications. Possessing these superior properties, the defects like porosity, hot cracking and stress corrosion cracking during welding of aluminium alloy is yet to be optimized. This paper focus to determine the favourable welding conditions for Tungsten Inert Gas (TIG) welding of 6061Al alloy based on Taguchi's design of experiments. Hence the concentration is on experimentally identifying the effect of the different welding parameters on hardness and weld bead geometry at weld zone under different welding condition obtained by L9 Orthogonal array using Taguchi's design of experiments.",

author = "Jayashree, {P. K.} and Sharma, {S. S.} and Raviraj Shetty and Ashish Mahato and Gowrishankar, {M. C.}",

year = "2018",

month = jan,

day = "1",

doi = "10.1016/j.matpr.2018.10.154",

language = "English",

volume = "5",

pages = "23648--23655",

journal = "Materials Today: Proceedings",

issn = "2214-7853",

publisher = "Elsevier Limited",

number = "11",

note = "2017 International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2017 ; Conference date: 17-08-2017 Through 19-08-2017",

}

TY - JOUR

T1 - Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

AU - Jayashree, P. K.

AU - Sharma, S. S.

AU - Shetty, Raviraj

AU - Mahato, Ashish

AU - Gowrishankar, M. C.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Aluminium in pure form has comparably less strength, though some of its alloys are stronger than structural steels. 6061Al alloy is so strong and hence used in aggressive conditions like aerospace applications. Possessing these superior properties, the defects like porosity, hot cracking and stress corrosion cracking during welding of aluminium alloy is yet to be optimized. This paper focus to determine the favourable welding conditions for Tungsten Inert Gas (TIG) welding of 6061Al alloy based on Taguchi's design of experiments. Hence the concentration is on experimentally identifying the effect of the different welding parameters on hardness and weld bead geometry at weld zone under different welding condition obtained by L9 Orthogonal array using Taguchi's design of experiments.

AB - Aluminium in pure form has comparably less strength, though some of its alloys are stronger than structural steels. 6061Al alloy is so strong and hence used in aggressive conditions like aerospace applications. Possessing these superior properties, the defects like porosity, hot cracking and stress corrosion cracking during welding of aluminium alloy is yet to be optimized. This paper focus to determine the favourable welding conditions for Tungsten Inert Gas (TIG) welding of 6061Al alloy based on Taguchi's design of experiments. Hence the concentration is on experimentally identifying the effect of the different welding parameters on hardness and weld bead geometry at weld zone under different welding condition obtained by L9 Orthogonal array using Taguchi's design of experiments.

UR - http://www.scopus.com/inward/record.url?scp=85058423251&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85058423251&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2018.10.154

DO - 10.1016/j.matpr.2018.10.154

M3 - Conference article

AN - SCOPUS:85058423251

SN - 2214-7853

VL - 5

SP - 23648

EP - 23655

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

IS - 11

T2 - 2017 International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2017

Y2 - 17 August 2017 through 19 August 2017

ER -

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this