Studies on development of soft robotic bending actuator using natural rubber

D. Deepak, Muhammad Ameen, Rohit Jagan, Kashish Kumar

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)


Objectives: This article investigates the usage of natural rubber in raw form as an alternative to commercial elastomeric for manufacturing the soft robotic actuator. Methods: Soft actuator is fabricated with pure latex as well as with formic acid as additive. The mold surface was coated with releasing agent and the latex is carefully poured into the mold. Curing was made at room temperature for 2 days and post curing is done at 80 °C for two hours. Findings: The actuator made using natural latex without acid exhibited higher shrinkage. Whereas, the actuator treated with formic acid confirms the dimensional stability and comparatively lesser pores. Hence the natural latex with suitable additives can be used in the manufacture of soft actuators for robots. However, there is need of further investigation for establishing optimum combinations of the additives with natural rubber to obtain the desired properties in the actuator. Application: The developments in the proposed field of soft actuator reduce the cost of end effectors which find applications in medical as well as in engineering domain.

Original languageEnglish
Article number94660
JournalIndian Journal of Science and Technology
Issue number42
Publication statusPublished - 01-01-2016

All Science Journal Classification (ASJC) codes

  • General


Dive into the research topics of 'Studies on development of soft robotic bending actuator using natural rubber'. Together they form a unique fingerprint.

Cite this