Study of the surface layer of ground high strength steels

B. Srinivasa Bairi; V. Radhakrishnan

doi:10.1016/0043-1648(75)90140-4

Study of the surface layer of ground high strength steels

B. Srinivasa Bairi, V. Radhakrishnan

Research output: Contribution to journal › Article › peer-review

Abstract

Grinding is one of the most widely used finishing operations to obtain close tolerances and a reasonably good surface finish. The effects of rough grinding on different types of steels both hardened and unhardened have been studied. Most of the surface defects caused by extremely abusive conditions were produced by rough grinding. The effects of gentle and conventional conditions of grinding were also studied for comparative data. © 1975.

Original language	English
Pages (from-to)	41-52
Number of pages	12
Journal	Wear
Volume	35
Issue number	1
DOIs	https://doi.org/10.1016/0043-1648(75)90140-4
Publication status	Published - 1975
Externally published	Yes

Access to Document

10.1016/0043-1648(75)90140-4

https://www.scopus.com/inward/record.uri?eid=2-s2.0-0016574391&doi=10.1016%2f0043-1648%2875%2990140-4&partnerID=40&md5=7cbe4dbbe86990795926394ba3e49cc4

Cite this

@article{0ca645f8cfa64c7fb7440dbcc4f77bf4,

title = "Study of the surface layer of ground high strength steels",

abstract = "Grinding is one of the most widely used finishing operations to obtain close tolerances and a reasonably good surface finish. The effects of rough grinding on different types of steels both hardened and unhardened have been studied. Most of the surface defects caused by extremely abusive conditions were produced by rough grinding. The effects of gentle and conventional conditions of grinding were also studied for comparative data. {\textcopyright} 1975.",

author = "{Srinivasa Bairi}, B. and V. Radhakrishnan",

note = "cited By 3",

year = "1975",

doi = "10.1016/0043-1648(75)90140-4",

language = "English",

volume = "35",

pages = "41--52",

journal = "Wear",

issn = "0043-1648",

publisher = "Elsevier BV",

number = "1",

}

TY - JOUR

T1 - Study of the surface layer of ground high strength steels

AU - Srinivasa Bairi, B.

AU - Radhakrishnan, V.

N1 - cited By 3

PY - 1975

Y1 - 1975

N2 - Grinding is one of the most widely used finishing operations to obtain close tolerances and a reasonably good surface finish. The effects of rough grinding on different types of steels both hardened and unhardened have been studied. Most of the surface defects caused by extremely abusive conditions were produced by rough grinding. The effects of gentle and conventional conditions of grinding were also studied for comparative data. © 1975.

AB - Grinding is one of the most widely used finishing operations to obtain close tolerances and a reasonably good surface finish. The effects of rough grinding on different types of steels both hardened and unhardened have been studied. Most of the surface defects caused by extremely abusive conditions were produced by rough grinding. The effects of gentle and conventional conditions of grinding were also studied for comparative data. © 1975.

U2 - 10.1016/0043-1648(75)90140-4

DO - 10.1016/0043-1648(75)90140-4

M3 - Article

SN - 0043-1648

VL - 35

SP - 41

EP - 52

JO - Wear

JF - Wear

IS - 1

ER -

Study of the surface layer of ground high strength steels

Abstract

Access to Document

Fingerprint

Cite this